Suppr超能文献

使用离散事件驱动的面向块的网络仿真进行全部门手术图像存档与通信系统分析

Operational departmentwide picture archiving communication system analysis using discrete event-driven block-oriented network simulation.

作者信息

Stewart B K

机构信息

Department of Radiological Sciences, University of California, School of Medicine, Los Angeles 90024-1721.

出版信息

J Digit Imaging. 1993 May;6(2):126-39. doi: 10.1007/BF03168439.

Abstract

The accurate prediction of image throughput is a critical issue in planning for and acquisition of any successful picture archiving and communication system (PACS). Simulation plays an important role in this effort. The PACS image management chain is decomposed into eight subsystems. These subsystems include network transfers over three different networks and five software programs and/or queueing structures. This decomposition is used to create a simulation model that was effectuated using commercially available block-oriented network simulation software. From the PACS database, the traffic generation patterns of the imaging modality devices are used to drive the simulation. The simulation models the image file flow through the PACS for a 24-hour period. The behavior of the simulated traffic generators agreed well with the values derived from the PACS database. The mean delay for the simulated PACS is found to be 225 +/- 59 seconds. The delay time was found to vary during the simulated 24-hour cycle in a consistent manner with observations. This simulation provides estimates on what a radiological department can expect from a PACS in terms of throughput, utilization, and delay. The block-oriented network simulator (BONeS, Comdisco Systems Inc, Foster City, CA) simulation model of the modeled PACS is highly accurate. The models for the imaging modality traffic sources are validated with a high degree of accuracy. The simulation model allows for the study of what happens to the delay time under various loads. In this simulation, the reformatting process was determined to be the bottleneck causing a large increase in delay time under heavy loads.

摘要

准确预测图像吞吐量是规划和购置任何成功的图像存档与通信系统(PACS)的关键问题。模拟在这项工作中起着重要作用。PACS图像管理链被分解为八个子系统。这些子系统包括通过三种不同网络的网络传输以及五个软件程序和/或排队结构。这种分解用于创建一个使用商用面向块的网络模拟软件实现的模拟模型。从PACS数据库中,成像模态设备的流量生成模式被用于驱动模拟。该模拟对图像文件在PACS中24小时的流动进行建模。模拟流量生成器的行为与从PACS数据库得出的值吻合良好。发现模拟PACS的平均延迟为225 +/- 59秒。发现延迟时间在模拟的24小时周期内以与观察结果一致的方式变化。该模拟提供了关于放射科在吞吐量、利用率和延迟方面可以从PACS预期得到什么的估计。所建模的PACS的面向块的网络模拟器(BONeS,Comdisco Systems Inc,加利福尼亚州福斯特城)模拟模型高度准确。成像模态流量源的模型得到了高度准确的验证。该模拟模型允许研究在各种负载下延迟时间会发生什么情况。在该模拟中,重新格式化过程被确定为在重负载下导致延迟时间大幅增加的瓶颈。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验