Bragg D G, Murray K A, Tripp D
Department of Radiology, University of Utah Health Sciences Center, Salt Lake City 84132, USA.
AJR Am J Roentgenol. 1997 Oct;169(4):935-41. doi: 10.2214/ajr.169.4.9308439.
In summary, we believe that the CR system adds significantly to our department. The film quality is superb, and the learning curve for radiologists to adapt to the added noise from anatomic structures on chest radiographs is short. The inherent film latitude and flexibility add a new dimension to interpretation and film management. System costs are significantly greater than for traditional film-screen systems. Recurring operational costs are yet to be determined but certainly will be greater with the shorter expected life span of the imaging plates. Film cost savings cannot be a justifiable reason for using a CR system. Film cost savings must await the ultimate conversion to soft imaging through networks and workstations. Technical issues are significant and require structured and specific courses of study and workshops for users before implementation of the CR system. As CR owners, we were frustrated by the lack of published protocols and guides for the CR user. Most of our experiences were learned in practice, and we believed published guides would be useful for both existing users and future buyers. Careful attention to accuracy, histogram selection, positioning, collimation, and patient data input is critical to the success of CR. The persistent lack of a CR information system interface has led to occasional labeling errors and requires added vigilance on the part of both the technologist and the radiologist. Other important user problems we experienced with CR included the RVS. When images are reprinted from the RVS, they can be printed on 10 x 14 inch (26 x 36 cm) film only. Images that were acquired on the larger cassettes are printed on this smaller film, minified by one third from the original size. Minified images are unacceptable to our orthopedic colleagues. Networking problems have still not been resolved, and this resolution remains an important goal. The manipulation and transfer of images without loss of data were major reasons for our switch to electronic imaging and have still not been achieved. Unique image artifacts were encountered, as were new parameters to judge the quality of an image. The final issue is radiation dose. To assign dose reduction as an attribute of CR would be misleading. We have found that in many instances the reverse is true. Many examinations have required more radiation exposure than traditional film-screen techniques. At the least, to harvest the benefits of CR one must significantly alter technical exposure factors and understand how the system operates. The problems we encountered were not minor. Our technologists and radiologists and the Fuji personnel have put in many hours to implement and optimize our system. The image quality is superb, and we continue to work on the important networking and archival goals.
总之,我们认为计算机X线摄影(CR)系统极大地提升了我们科室的水平。胶片质量非常出色,放射科医生适应胸部X线片上解剖结构增加的噪声的学习曲线很短。固有的胶片宽容度和灵活性为影像解读和胶片管理增添了新的维度。系统成本明显高于传统的屏-片系统。经常性运营成本尚未确定,但鉴于成像板预期寿命较短,肯定会更高。节省胶片成本不能成为使用CR系统的正当理由。节省胶片成本必须等待最终通过网络和工作站转换为软成像。技术问题很重要,在实施CR系统之前,需要为用户提供结构化的特定学习课程和研讨会。作为CR系统的用户,我们因缺乏针对CR用户的已发表协议和指南而感到沮丧。我们的大多数经验都是在实践中获得的,我们认为已发表的指南对现有用户和未来买家都会有用。仔细关注准确性、直方图选择、定位、准直和患者数据输入对于CR的成功至关重要。持续缺乏CR信息系统接口导致偶尔出现标注错误,这需要技术人员和放射科医生都更加警惕。我们在CR方面遇到的其他重要用户问题包括远程视频系统(RVS)。当从RVS重新打印图像时,只能打印在10×14英寸(26×36厘米)的胶片上。在较大暗盒上采集的图像打印在这种较小的胶片上,尺寸比原始尺寸缩小了三分之一。缩小后的图像我们的骨科同事无法接受。网络问题仍未解决,解决这一问题仍然是一个重要目标。在不丢失数据的情况下进行图像操作和传输是我们转向电子成像的主要原因,但至今仍未实现。出现了独特的图像伪影,同时也有判断图像质量的新参数。最后一个问题是辐射剂量。将剂量降低作为CR的一个特性是有误导性的。我们发现在很多情况下情况恰恰相反。许多检查所需的辐射暴露比传统的屏-片技术更多。至少,要获得CR的益处,必须显著改变技术曝光因素并了解系统的运行方式。我们遇到的问题并不小。我们的技术人员、放射科医生以及富士公司的人员投入了大量时间来实施和优化我们的系统。图像质量非常出色,我们继续致力于实现重要的网络和存档目标。