Lenaerts V, Moussa I, Dumoulin Y, Mebsout F, Chouinard F, Szabo P, Mateescu M A, Cartilier L, Marchessault R
Labopharm Inc., Laval, Canada.
J Control Release. 1998 Apr 30;53(1-3):225-34. doi: 10.1016/s0168-3659(97)00256-3.
Cross-linked high amylose starches have been developed as excipients for the formulation of controlled-release solid dosage forms for the oral delivery of drugs. Advantages of this new class of excipients include cost-effectiveness, readily accessible industrial manufacturing technology, high active ingredient core loading and the possibility of achieving a quasi zero-order release for most drugs. In addition to the latter, other features distinguish cross-linked high amylose starches from other excipients used to prepare hydrophilic matrices. Among these are the absence of erosion, the limited swelling and the fact that increasing cross-linking degrees results in increased water uptake rate, drug release rate and equilibrium swelling. Thus the goal of the present study was to gain some insights into the mechanism of drug release control by matrices of cross-linked high amylose starch. Water transport kinetics and dimensional changes were studied in matrices placed in water at 37 degrees C by an image analysis technique. The results show that in the first 5 min, a gel layer is formed at the surface of the tablet, after which the gel front seems to halt its progression toward the center of the tablet. Water continues to diffuse through the front and to invade the core. As a consequence, this latter swells, with a predominance for radial swelling. Equilibrium swelling is reached over 3 days, when the water concentration in the tablet becomes homogeneous and the whole tablet gelifies. Solid-state 13C-NMR were acquired on cross-linked high amylose starch powders, tablets and hydrated tablets with varying cross-linking degrees. They show a predominance of the V-type single helix arrangement of amylose in the dry state irrespective of the cross-linking degree. Upon hydration, the homologues with a low cross-linking degrees show a transition from the V to the B-type double helix arrangement. It is therefore hypothesized that the capacity of amylose to undergo the V to B transition is an important factor in controlling water transport and drug release rate. Finally applications to different drugs are reviewed briefly. They illustrate the versatility of this technology as generic versions of zero order OROS drug (Efidac) and Fickian release conventional matrices (Voltaren SR) were developed and successfully tested in pilot clinical studies to be bioequivalent to the references. These studies further showed that cross-linked high amylose starch matrices have the lowest inter-subject variability among the systems tested and show a total absence of food effect.
交联高直链淀粉已被开发用作辅料,用于制备口服给药的控释固体剂型。这类新型辅料的优点包括成本效益高、工业制造技术容易获得、活性成分核心载药量高以及大多数药物有可能实现近似零级释放。除了后者,交联高直链淀粉还有其他一些特性,使其区别于用于制备亲水性基质的其他辅料。其中包括不存在侵蚀现象、溶胀有限,以及交联度增加会导致吸水率、药物释放率和平衡溶胀增加。因此,本研究的目的是深入了解交联高直链淀粉基质控制药物释放的机制。通过图像分析技术研究了置于37℃水中的基质中的水传输动力学和尺寸变化。结果表明,在前5分钟内,片剂表面形成凝胶层,之后凝胶前沿似乎停止向片剂中心推进。水继续通过前沿扩散并侵入核心。结果,后者发生溶胀,以径向溶胀为主。3天后达到平衡溶胀,此时片剂中的水浓度变得均匀,整个片剂凝胶化。对不同交联度的交联高直链淀粉粉末、片剂和水合片剂进行了固态13C-NMR分析。结果表明,无论交联度如何,直链淀粉在干燥状态下主要呈V型单螺旋排列。水合后,低交联度的同系物显示从V型向B型双螺旋排列转变。因此推测,直链淀粉发生V型向B型转变的能力是控制水传输和药物释放速率的重要因素。最后简要回顾了其在不同药物中的应用。这些应用说明了该技术的多功能性,因为已开发出零级OROS药物(Efidac)的通用版本和菲克扩散释放常规基质(Voltaren SR),并在试点临床研究中成功测试,证明与参比制剂生物等效。这些研究进一步表明,交联高直链淀粉基质在所测试的系统中受试者间变异性最低,并且完全不存在食物效应。