Craig-Scott orthosis: a biochemical and functional evaluation.

The Craig-Scott double upright knee ankle orthosis was subjected to a biomechanical evaluation which included analysis of the force interaction with the supported limb and a functional evaluation. The results were compared with data previously determined from biomechanical evaluations of other common orthoses. In the Craig-Scott design, the single application of the knee stabilizing force below the knee concentrates this force in a relatively small bony area, sometimes exceeding tolerance. This might be avoided by using a tibial closure with patellar tendon bearing features. The design was found to produce relatively low anatomic knee shear. In functional aspects such as donning, doffing, transfers and ambulation, the orthosis is essentially equivalent to other double upright designs. The rigidity of the orthosis with only a tibial band closure and a bail connecting the uprights was determined to be adequate. The limited number of bands and closures provides some advantages in reduced donning and doffing time; however, in the absence of posterior closures below the knee, the orthosis had a tendency to slide forward off the leg when transferring. This disadvantage was eliminated by adding a soft posterior closure below the knee, which produced a minimal increase in donning and doffing times.