A comparison of worker exposure to inhalable and total dust, inorganic arsenic, and borates using two types of particulate sampling assemblies in a borate mining and processing facility.

This study describes a comparison of worker exposure to total and inhalable dust, inorganic As, and borates using two types of particulate sampling assemblies as part of a comprehensive industrial hygiene evaluation in a borate mining and processing facility. Employees were segmented into similar exposure groups (SEG) based on work location within the facility, job classification, and type of chemical agent. Approximately 10% of the employees from each SEG wore two personal sampling devices simultaneously for the purpose of collecting total and inhalable particulate fractions using a closed face, 37-mm mixed cellulose ester matched-weight filters (MMW), and Institute of Occupational Medicine (IOM) sampling assembly. Sample results indicated that the IOM concentrations were consistently higher than the corresponding MMW concentrations for all three agents. An analysis was performed to investigate a relationship between MMW and IOM. The data revealed correlation coefficient values of 0.72, 0.82, and 0.84 for total dust (n = 197), inorganic As (n = 137), and borates (n = 194), respectively. These positive correlation coefficients indicate that the IOM and MMW measurements are consistent with each other, and can be used for predicting exposure levels. The total dust and borate large mean ratios should be considered in developing inhalable fraction-based regulatory standards.