Smith E M, Ruffel J D, Fisher M
Department of Radiology, University of Rochester Medical Center, NY 14642-8648, USA.
J Digit Imaging. 1999 May;12(2 Suppl 1):93-5. doi: 10.1007/BF03168767.
The Relay is a generic Digital Imaging and Communications in Medicine (DICOM)-compliant software package. It is a bidirectional interface between the modality and the radiology information system (RIS) that uses DICOM modality worklist and modality-performed procedure step services. This device can eliminate discrepancies between patient demographic information contained in the RIS and that entered at the imaging modality. The Relay receives the worklist for a modality from the RIS. It verifies the accession number (ACC#) and medical record number (MRN) received from the RIS for a study against the ACC# and MRN entered at the modality after that study is pushed to the Relay by the modality. If the values for the ACC# and MRN contained in the image header coincide with the values stored on the RIS, the patient demographics and study protocol contained in the RIS is downloaded into the image header. The study is then automatically routed to the specified destination without technologist intervention. Images whose header does not coincide with data on the RIS are flagged for subsequent reconciliation by the technologist. When the study is completed, the Relay updates the status of the study in the RIS, if the RIS provides DICOM performed procedure step service. When required, the Relay is able to split a single study into two or more series and assign each an ACC#. Other Relay functionality includes sending studies to multiple DICOM devices, adding comments to the image header, and DICOM print service. Should the archive be unavailable to receive images for whatever reason, the Relay can store studies so image acquisition can continue without interruption or it can divert studies directly to a diagnostic workstation. This Relay provides redundancy and fault-tolerance capabilities for picture archiving and communications systems. It is vendor-independent and will function with any DICOM modality, RIS, or archive.
Relay是一个通用的符合医学数字成像和通信(DICOM)标准的软件包。它是模态设备与放射学信息系统(RIS)之间的双向接口,使用DICOM模态工作列表和模态执行程序步骤服务。该设备可以消除RIS中包含的患者人口统计信息与成像模态中输入的信息之间的差异。Relay从RIS接收模态设备的工作列表。在模态设备将某项研究推送给Relay后,它会将从RIS接收的该研究的 accession编号(ACC#)和病历号(MRN)与在模态设备处输入的ACC#和MRN进行核对。如果图像头中包含的ACC#和MRN值与RIS上存储的值一致,则RIS中包含的患者人口统计信息和研究方案将被下载到图像头中。然后,该研究将自动路由到指定目的地,无需技术人员干预。图像头与RIS上的数据不一致的图像将被标记,以便技术人员随后进行核对。如果RIS提供DICOM执行程序步骤服务,当研究完成时,Relay会更新RIS中该研究的状态。在需要时,Relay能够将单个研究拆分为两个或更多系列,并为每个系列分配一个ACC#。Relay的其他功能包括将研究发送到多个DICOM设备、在图像头中添加注释以及DICOM打印服务。如果存档由于任何原因无法接收图像,Relay可以存储研究,以便图像采集可以不间断地继续进行,或者它可以将研究直接转移到诊断工作站。此Relay为图像存档和通信系统提供冗余和容错功能。它与供应商无关,可与任何DICOM模态设备、RIS或存档配合使用。