Hayashi H, Kono K, Takagishi T
Shiga Central Research Laboratories, Noevir, Co., Ltd., Yokaichi, Shiga 527-8588, Japan.
Bioconjug Chem. 1999 May-Jun;10(3):412-8. doi: 10.1021/bc980111b.
To obtain liposomes which release the contents in response to ambient temperature, liposomes modified with copolymers of N-isopropylacrylamide with varying lower critical solution temperatures have been designed. Poly(N-isopropylacrylamide-co-acrylamide)s with various compositions were synthesized by free-radical copolymerization. The lower critical solution temperature of the polymer increased with increasing acrylamide content in the polymer. Poly(N-isopropylacrylamide-co-acrylamide-co-N, N-didodecylacrylamide)s were also prepared via the same method as the thermosensitive polymers having anchor groups to the liposome membrane. Calcein-loaded dioleoylphosphatidylethanolamine/egg yolk phosphatidylcholine (6:4, w/w) liposomes were coated with these polymers by incubating the liposomes with aqueous solutions of the polymers. The liposomes hardly released the contents below the lower critical solution temperature of the polymer, but the release was greatly enhanced above that temperature. The liposomes were also made from a mixture of the same lipids and the polymer. The liposome revealed a more drastic release property than the liposomes prepared by the incubation with the polymer solution, because the polymer chains were bound on both surfaces of the membrane. The close relationship between lower critical solution temperatures of the polymers and temperature regions where enhancement of the release from the polymer-fixed liposomes demonstrates that the release was triggered by alteration of the polymers from a hydrophilic state to a hydrophobic state occurring at their lower critical solution temperatures.
为了获得能根据环境温度释放内容物的脂质体,人们设计了用具有不同低临界溶解温度的N-异丙基丙烯酰胺共聚物修饰的脂质体。通过自由基共聚合成了具有不同组成的聚(N-异丙基丙烯酰胺-共-丙烯酰胺)。聚合物的低临界溶解温度随着聚合物中丙烯酰胺含量的增加而升高。聚(N-异丙基丙烯酰胺-共-丙烯酰胺-共-N,N-二十二烷基丙烯酰胺)也通过与制备对脂质体膜具有锚定基团的热敏聚合物相同的方法制备。通过将脂质体与聚合物的水溶液孵育,用这些聚合物包被负载有钙黄绿素的二油酰磷脂酰乙醇胺/蛋黄卵磷脂(6:4,w/w)脂质体。在聚合物的低临界溶解温度以下,脂质体几乎不释放内容物,但在该温度以上,释放显著增强。脂质体也由相同脂质和聚合物的混合物制成。该脂质体显示出比通过与聚合物溶液孵育制备的脂质体更剧烈的释放特性,因为聚合物链结合在膜的两个表面上。聚合物的低临界溶解温度与聚合物固定脂质体释放增强的温度区域之间的密切关系表明,释放在聚合物的低临界溶解温度下聚合物从亲水性状态转变为疏水性状态时被触发。