Del Pizzo J J, Sklar G N, You-Cheong J W, Levin B, Krebs T, Jacobs S C
Department of Surgery, University of Maryland School of Medicine, Baltimore 21201, USA.
J Urol. 1999 Jul;162(1):31-4. doi: 10.1097/00005392-199907000-00008.
Traditionally, live renal donors are evaluated with excretory urography and renal arteriography. Helical computerized tomography (CT) arteriography offers a less invasive alternative for demonstrating necessary anatomical information before laparoscopic allograft harvest. We evaluate the accuracy of helical CT arteriography in depicting renal vascular anatomy with an emphasis on the detection of arterial and venous anomalies.
Imaging studies were done on 175 patients according to a standard CT arteriography protocol with early arterial phase scanning (14 to 20-second delay), and 1 mm. axial and 3-dimensional maximum intensity projection reconstructions. Renal vascular anatomy was mapped with attention to aberrant arterial and venous anatomy. Intraoperative findings were correlated at laparoscopic donor nephrectomy.
There was overall agreement between CT arteriography and laparoscopic findings in 163 cases (93%). Supernumerary renal arteries were identified in 40 cases (23%). Sensitivity, specificity and accuracy of CT arteriography for arterial anatomy were 91, 98 and 96%, respectively. Cases with less than 2 mm. accessory arteries or early branching single vessels simulating dual arteries were misdiagnosed. Venous anomalies occurred in 11 patients (6.3%). Sensitivity, specificity and accuracy of CT arteriography for venous anatomy were 65, 100, and 97%, respectively. Misdiagnoses included early venous bifurcations and supernumerary tributary veins, which were poorly opacified.
Helical CT is highly accurate and specific for the demonstration of renal arterial anatomy. Poor opacification resulted in a lower sensitivity for venous anatomy. Overall, helical CT provides essential anatomical information, and is an alternative to standard urography and arteriography.
传统上,活体肾供体通过排泄性尿路造影和肾动脉造影进行评估。螺旋计算机断层扫描(CT)动脉造影为在腹腔镜下采集同种异体肾之前显示必要的解剖信息提供了一种侵入性较小的替代方法。我们评估螺旋CT动脉造影在描绘肾血管解剖结构方面的准确性,重点是检测动脉和静脉异常。
根据标准CT动脉造影方案,对175例患者进行成像研究,包括早期动脉期扫描(延迟14至20秒),以及1毫米轴向和三维最大强度投影重建。绘制肾血管解剖结构,关注异常的动脉和静脉解剖结构。在腹腔镜供体肾切除术中将术中发现进行对比。
163例(93%)CT动脉造影结果与腹腔镜检查结果总体一致。40例(23%)发现有额外肾动脉。CT动脉造影对动脉解剖结构的敏感性、特异性和准确性分别为91%、98%和96%。直径小于2毫米的副动脉或模拟双动脉的早期分支单支血管的病例被误诊。11例患者(6.3%)出现静脉异常。CT动脉造影对静脉解剖结构的敏感性、特异性和准确性分别为65%、100%和97%。误诊包括早期静脉分叉和额外的分支静脉,其造影剂充盈不佳。
螺旋CT在显示肾动脉解剖结构方面具有高度准确性和特异性。造影剂充盈不佳导致对静脉解剖结构的敏感性较低。总体而言,螺旋CT提供了重要的解剖信息,是标准尿路造影和动脉造影的一种替代方法。