Suppr超能文献

通过接触角测量估算苯乙烯-丙烯腈无规共聚物的表面性质

Estimation of the Surface Properties of Styrene-Acrylonitrile Random Copolymers from Contact Angle Measurements.

作者信息

Adão MH, Saramago BJ, Fernandes AC

机构信息

Instituto Superior das Ciências da Saúde-Sul, Quinta da Granja, Monte da Caparica, 2825, Portugal

出版信息

J Colloid Interface Sci. 1999 Sep 1;217(1):94-106. doi: 10.1006/jcis.1999.6279.

Abstract

The surface free energy per unit area of a solid, gamma(S), is a fundamental property of materials and determines their surface and interfacial behavior in processes like wetting and adhesion. In this study the gamma(S) of a series of styrene-acrylonitrile random copolymers is evaluated. Three different approaches are used to determine the components in which the surface free energy can be decomposed. Using the geometric and the harmonic mean approach, the dispersive, gamma(d), and polar, gamma(p), components of the solid surface free energy were determined and compared to the Lifshitz-van der Waals, gamma(LW), and acid-base, gamma(AB), components using the approach developed by C. J. van Oss et al. (1987, Adv. Colloid Interface Sci. 28, 35). The acid-base approach was also used to evaluate the work of adhesion of the test liquids: water, glycerol, and thiodiglycol. It was found that the contact angles of these liquids follow closely the predictions of Cassie equation. The evaluation of the surface free energy components on one hand and the relative magnitude of the work of adhesion components on the other hand, suggest that below 50% of acrylonitrile the polystyrene repeating units are preferentially at the surface. Above 50% of acrylonitrile the segregation of the low-energy homopolymer at the surface decreases. Copyright 1999 Academic Press.

摘要

固体每单位面积的表面自由能γ(S)是材料的一项基本属性,它决定了材料在诸如润湿和粘附等过程中的表面及界面行为。在本研究中,对一系列苯乙烯 - 丙烯腈无规共聚物的γ(S)进行了评估。采用三种不同方法来确定表面自由能可分解成的组分。使用几何平均法和调和平均法,确定了固体表面自由能的色散分量γ(d)和极性分量γ(p),并与采用C. J. 范奥丝等人(1987年,《胶体与界面科学进展》28卷,35页)所开发方法得出的 Lifshitz - 范德华分量γ(LW)和酸碱分量γ(AB)进行了比较。酸碱方法还用于评估测试液体(水、甘油和硫代二甘醇)的粘附功。发现这些液体的接触角与卡西方程的预测结果非常吻合。一方面对表面自由能组分的评估,另一方面对粘附功组分相对大小的评估表明,丙烯腈含量低于50%时,聚苯乙烯重复单元优先位于表面。丙烯腈含量高于50%时,表面低能均聚物的偏析程度降低。版权所有1999年,学术出版社。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验