Stenfelt S P, Håkansson B E
Department of Signals and Systems, Medical Electronics Group, Chalmers University of Technology, Göteborg, Sweden.
Scand Audiol. 1999;28(3):190-8. doi: 10.1080/010503999424761.
The sensitivity of nine subjects to bone-conducted sound was measured at three positions: osseointegrated percutaneous titanium implants in the temporal bone, the skin-covered mastoid and the teeth. Voltage levels supplied to a bone-anchored hearing aid (BAHA) transducer and to an Oticon bone-transducer were measured and the thresholds obtained at the three positions were compared. Using the mechanical impedance of the teeth, the parameters of a first order model for the vibration transmission through the teeth was calculated. Also, the equivalent force thresholds were calculated from the voltage threshold levels. The sensitivity to bone-conducted sound, for both voltage and force thresholds, conformed fairly well at the three positions for frequencies below 1 kHz; however, above 1 kHz, bone-conducted sound applied at the titanium implant becomes more sensitive than at the two other positions investigated. It was concluded that the teeth can be used for the application of bone-conducted sound, in particular for pre-operative assessment of a BAHA and to facilitate service and quality control of such a hearing device.
颞骨中的骨整合经皮钛植入物、皮肤覆盖的乳突和牙齿。测量了提供给骨锚式助听器(BAHA)换能器和奥迪康骨换能器的电压水平,并比较了在这三个位置获得的阈值。利用牙齿的机械阻抗,计算了通过牙齿进行振动传输的一阶模型的参数。此外,根据电压阈值水平计算了等效力阈值。对于低于1kHz的频率,在这三个位置,骨导声音的电压和力阈值敏感度相当吻合;然而,在1kHz以上,施加在钛植入物上的骨导声音比在其他两个研究位置更敏感。得出的结论是,牙齿可用于骨导声音的应用,特别是用于BAHA的术前评估以及促进这种听力设备的服务和质量控制。