Gowers D M, Bijapur J, Brown T, Fox K R
Division of Biochemistry and Molecular Biology, School of Biological Sciences, University of Southampton, U.K.
Biochemistry. 1999 Oct 12;38(41):13747-58. doi: 10.1021/bi9911637.
DNase I footprinting has been used to study the formation of parallel triplexes at oligopurine target sequences which are interrupted by pyrimidines at regular intervals. TA interruptions are targeted with third strand oligonucleotides containing guanine, generating G x TA triplets, while CG base pairs are targeted with thymine, forming T x CG triplets. We have attempted to optimize the stability of these complexes by varying the base composition and sequence arrangement of the target sites, and by replacing the third strand thymines with the positively charged analogue 5-(1-propargylamino)dU (U(P)). For the target sequence (AAAT)(5)AA, in which pyrimidines are positioned at every fourth residue, triplex formation with TG-containing oligonucleotides is only detected in the presence of a triplex-binding ligand, though stable triplexes were detected at the target site (AAAAAT)(3)AAAA. Triplex stability at targets containing pyrimidines at every fourth residue is increased by introducing guanines into the duplex repeat unit using the targets (AGAT)(5)AA and (ATGA)(5)AA. In contrast, placing C(+) x GC triplets on the 5'-side of G x TA, using the target (AGTA)(5)TT, produces complexes of lower stability. We have attempted further to increase the stability of these complexes by using the positively charged thymine base analogue U(P), and have shown that (TU(P)TG)(5)TT forms a more stable complex with target (AAAT)(5)AA than the unmodified third strand, generating a footprint in the absence of a triplex-binding ligand. Triplex formation at (AGTA)(5)AA is improved by using the modified oligonucleotide (TCGU(P))(5)TT, generating a complex in which the charged triplets C(+) x GC and U(P) x AT alternate with uncharged triplets. In contrast, placing U(P) x AT triplets adjacent to C(+) x GC, using the third strand oligonucleotide (U(P)CGT)(5)TT, reduces triplex formation, while the third strand with both substitutions, (U(P)CGU(P))(5)TT, produces a complex with intermediate stability. It appears that, although adjacent U(P) x AT triplets form stable triplexes, placing U(P) x AT adjacent to C(+) x GC is unfavorable. Similar results were obtained with fragments containing CG inversions within the oligopurine tract, though triplexes at (AAAAAC)(3)AA were only detected in the presence of a triplex-binding ligand. Placing C(+) x GC on the 5'-side of T x CG triplets also reduces triplex formation, while a 3'-C(+) x GC produces complexes with increased stability.
脱氧核糖核酸酶I足迹法已被用于研究在寡嘌呤靶序列上平行三链体的形成,这些序列被嘧啶以规则间隔打断。TA中断位点用含鸟嘌呤的第三链寡核苷酸靶向,生成G×TA三联体,而CG碱基对用胸腺嘧啶靶向,形成T×CG三联体。我们试图通过改变靶位点的碱基组成和序列排列,以及用带正电荷的类似物5-(1-丙炔基氨基)dU(U(P))取代第三链胸腺嘧啶来优化这些复合物的稳定性。对于靶序列(AAAT)(5)AA,其中嘧啶位于每四个残基处,只有在存在三链体结合配体的情况下,才能检测到与含TG的寡核苷酸形成三链体,尽管在靶位点(AAAAAT)(3)AAAA处检测到了稳定的三链体。通过使用靶序列(AGAT)(5)AA和(ATGA)(5)AA将鸟嘌呤引入双链重复单元,可提高在每四个残基处含嘧啶的靶序列上的三链体稳定性。相反,使用靶序列(AGTA)(5)TT,在G×TA的5'侧放置C(+)×GC三联体,会产生稳定性较低的复合物。我们进一步尝试通过使用带正电荷的胸腺嘧啶碱基类似物U(P)来提高这些复合物的稳定性,并表明(TU(P)TG)(5)TT与靶序列(AAAT)(5)AA形成的复合物比未修饰的第三链更稳定,在没有三链体结合配体的情况下产生足迹。使用修饰的寡核苷酸(TCGU(P))(5)TT可改善在(AGTA)(5)AA处的三链体形成情况,生成一种复合物,其中带电荷的三联体C(+)×GC和U(P)×AT与不带电荷的三联体交替出现。相反,使用第三链寡核苷酸(U(P)CGT)(5)TT,将U(P)×AT三联体置于C(+)×GC相邻位置,会减少三链体形成,而同时进行两种取代的第三链(U(P)CGU(P))(5)TT产生的复合物稳定性中等。似乎,尽管相邻的U(P)×AT三联体可形成稳定的三链体,但将U(P)×AT置于C(+)×GC相邻位置是不利的。在寡嘌呤序列中含有CG倒置的片段也得到了类似结果,尽管在(AAAAAC)(3)AA处的三链体仅在存在三链体结合配体的情况下才能检测到。在T×CG三联体的5'侧放置C(+)×GC也会减少三链体形成,而3'-C(+)×GC会产生稳定性增加的复合物。