Effects of amelogenin on the transforming surface microstructures of Bioglass in a calcifying solution.

Topographies of a bioactive glass (45S5 type Bioglass(R)) during 0-4 h of immersion in a supersaturated calcifying solution (SCS) and the SCS containing recombinant porcine amelogenin rP172 (SCS(rP172)) were observed by atomic force microscopy. Other techniques including X-ray diffraction, scanning electron microscopy coupled with energy dispersive X-ray spectroscopy, and transmission electron microscopy were used for some complementary microstructural investigations. The smooth Bioglass surface changed to be very rough after 0.5 h of SCS immersion because of glass network dissolution. Spherical silica-gel particles with diameters of 150-300 nm consisting of substructures of 20-60 nm across had formed on the sample surfaces after 1 h of SCS immersion. The chemisorption of amorphous calcium phosphate and crystallization of nanophase apatite were seen to occur epitaxially on the silica-gel structures during 1-4 h of SCS immersion. During the first 0.5 h of SCS(rP172) immersion, more than 95% of rP172 protein in solution was adsorbed onto the sample surfaces and generated spherical assemblies of 10-60 nm diameters. During 0.5-4 h of SCS(rP172) immersion, the protein assemblies of rP172 remarkably induced the formation of orientated silica-gel plates (approximately 100-nm wide and 50-nm thick) and subsequently of long and thin apatite needle crystals. The recombinant amelogenin rP172-modulated apatite crystals resembled those formed in the early stage of tooth enamel biomineralization, suggesting the functional roles of amelogenins during the oriented growth of enamel crystallites and a great potential for amelogenins in applications designed to fabricate enamel-like calcium phosphate biomaterials.