Department of Polymer Science and Technology, Faculty of Applied Sciences, Delft University of Technology, Julianalaan 136, Delft, NL 2628 BL, The Netherlands
J Colloid Interface Sci. 2000 Dec 15;232(2):350-363. doi: 10.1006/jcis.2000.7189.
The aim of this study is to determine the factors that contribute to the process of film formation of binder particles in drying aqueous dispersion coatings, based on acrylic polymers. It is known that concentrated latices of uniform size show iridescent, colored light patterns. These colors are caused by interparticle interference, and they are only present when the latex particles are ordered in a regular structure. The interparticle interference can be characterized by measuring the transmission as a function of wavelength of the incident light. It appeared that the changes of the interparticle interference of a drying latex film can be related to changes in the interparticle distance and displacement. It was also found that the interparticle distance becomes "negative" upon coalescence of the latex particles. This means that from this point on, the change in interparticle interference is directly related to the indentation or deformation of the latex particles. It became clear that the coalescence process differs from deformation mechanisms accepted in the literature. It seems that the deformation of the particles follows a biaxial mechanism. This means that the particles deform only in one direction, perpendicular to the film surface. Copyright 2000 Academic Press.
