Koxholt M M, Eisenmann B, Hinrichs J
Institute for Food Process Engineering, Dairy and Food Process Research Center (FML)-Weihenstephan, Germany.
J Dairy Sci. 2001 Jan;84(1):31-7. doi: 10.3168/jds.S0022-0302(01)74448-7.
The meltdown of ice cream is influenced by its composition and additives and by fat globule size. The objective of this study was to examine the effect of fat globule size and fat agglomerate size on the meltdown stability of ice cream. Therefore, an ice cream mix (10% milk fat) was homogenized at pressures ranging from 0 to 30 MPa in single-stage, double-stage, and selective homogenization processes. The ice cream, produced on a continuous ice cream freezer, was characterized by an optimized meltdown test while, in addition, the fat globule sizes and the free fat content were determined in the mix and the molten ice cream. The meltdown was dependent on the fat agglomerate sizes in the unfrozen serum phase. Agglomerates smaller than a critical diameter led to significantly higher meltdown rates. Homogenization pressures of at least 10 MPa were sufficient to produce a stable ice cream. Furthermore, proof was provided that double-stage homogenization is not necessary for fat contents up to 10% and that selective homogenization is possible to produce stable ice creams. Based on these results a model was deduced describing the stabilizing mechanisms during the meltdown process.
冰淇淋的融化受其成分、添加剂以及脂肪球大小的影响。本研究的目的是考察脂肪球大小和脂肪聚集体大小对冰淇淋融化稳定性的影响。因此,将一种冰淇淋混合料(乳脂肪含量为10%)在单级、双级和选择性均质过程中于0至30兆帕的压力下进行均质。在连续式冰淇淋冷冻机上生产的冰淇淋通过优化的融化试验进行表征,此外,还测定了混合料和融化后的冰淇淋中的脂肪球大小及游离脂肪含量。融化取决于未冻结血清相中脂肪聚集体的大小。小于临界直径的聚集体会导致显著更高的融化速率。至少10兆帕的均质压力足以生产出稳定的冰淇淋。此外,还证明了对于高达10%的脂肪含量,双级均质并非必要,并且选择性均质有可能生产出稳定的冰淇淋。基于这些结果推导了一个描述融化过程中稳定机制的模型。