Suppr超能文献

全膝关节置换术后的髌股并发症

Patellofemoral complications following total knee arthroplasty.

作者信息

Kelly M A

机构信息

Insall-Scott-Kelly Institute for Orthopaedics and Sports Medicine, Department of Orthopaedic Surgery, Beth Israel Hospital, New York, New York, USA.

出版信息

Instr Course Lect. 2001;50:403-7.

Abstract

Patellofemoral complications following TKA are largely avoided with proper surgical technique. A variety of surgical exposures, including the midvastus and subvastus approach, has resulted in good clinical success. It is critical to maintain the integrity of the extensor mechanism. The surgeon should be prepared to use specific surgical techniques to assist in exposing the stiff knee and to avoid injury to the patellar tendon. These techniques may include the quadriceps snip, modified V-Y quadriceps turndown, and tibial tubercle osteotomy. When tibial tubercle osteotomy is necessary, the technique of Whiteside, using wire fixation of the osteotomy, is preferred. Selection of the proper femoral component size is important. In general, the surgeon should avoid selecting an excessively large femoral component and overstuffing the patellofemoral compartment. Similarly, the surgeon should restore the patella-implant composite to the original patellar thickness or slightly less when possible. Femoral component positioning is critical to proper patellofemoral tracking. The femoral component rotation should be aligned with the transepicondylar axis of the femur. The anteroposterior axis of the femur as described by Whiteside and Arima is a useful secondary landmark to ensure proper femoral component placement. A slightly lateral femoral component position is favored when possible to further facilitate proper patellar tracking. Proper rotation of the tibial component is important. A variety of surgical techniques and anatomic landmarks may be used to establish proper tibial component rotation. The surgeon must avoid internal rotation of the tibial component leading to an increased quadriceps angle and lateral maltracking of the patella. The patellar osteotomy may be performed using either a calibrated cutting system or an eyeball technique. The surgeon should avoid an oblique osteotomy placing the patellar component on the lateral facet. A cemented all-polyethylene component placed in a medialized position to improve patellar tacking is preferred. Proper soft-tissue tension may require a lateral retinacular release in a small percentage of cases. The superior lateral genicular artery is preserved when possible with the release. Proper patellofemoral tracking must be obtained at the time of the primary TKA. The diagnosis and treatment of the more frequent complications of the extensor mechanism following TKA have been discussed. Although these complications may be successfully treated, most may be largely avoided with proper surgical technique and prosthetic component design.

摘要

全膝关节置换术后的髌股并发症在采用恰当的手术技术时大多可以避免。多种手术入路,包括股中肌入路和股下肌入路,都取得了良好的临床效果。维持伸肌机制的完整性至关重要。外科医生应准备好使用特定的手术技术来辅助暴露僵硬的膝关节,并避免损伤髌腱。这些技术可能包括股四头肌松解、改良V-Y股四头肌翻转和胫骨结节截骨术。当需要进行胫骨结节截骨术时,首选Whiteside技术,即使用钢丝固定截骨术。选择合适的股骨假体尺寸很重要。一般来说,外科医生应避免选择过大的股骨假体并过度填充髌股关节腔。同样,外科医生应尽可能将髌骨-假体复合物恢复到原来的髌骨厚度或略薄一些。股骨假体的定位对于正确的髌股轨迹至关重要。股骨假体的旋转应与股骨的经髁轴对齐。Whiteside和有马描述的股骨前后轴是确保正确放置股骨假体的一个有用的次要标志。在可能的情况下,股骨假体稍向外侧的位置更有利于进一步促进正确 的髌股轨迹。胫骨假体的正确旋转很重要。可以使用多种手术技术和解剖标志来确定胫骨假体的正确旋转。外科医生必须避免胫骨假体向内旋转导致股四头肌角增大和髌骨外侧轨迹不良。髌骨截骨术可以使用校准切割系统或目测技术进行。外科医生应避免斜行截骨,以免将髌骨假体置于外侧小面。首选在内侧位置放置骨水泥固定的全聚乙烯假体以改善髌骨固定。在少数情况下,适当的软组织张力可能需要进行外侧支持带松解。松解时尽可能保留膝上外侧动脉。在初次全膝关节置换时必须获得正确的髌股轨迹。已经讨论了全膝关节置换术后伸肌机制更常见并发症的诊断和治疗。虽然这些并发症可能得到成功治疗,但大多数通过恰当的手术技术和假体设计在很大程度上可以避免。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验