Chonko Douglas J, Lombardi Adolph V, Berend Keith R
Joint Implant Surgeons, Inc., Columbus, Ohio, USA.
Surg Technol Int. 2004;12:231-8.
Patella baja, that can be divided into congenital, acquired, or a combination of the two, is commonly encountered in total knee arthroplasty (TKA). Congenital patella baja refers to a patella distal in relationship to the femoral trochlea and present since an early age. Acquired patella baja may occur secondary to distal positioning of the patella relative to the femoral trochlea or shortening of the patellar tendon, as a result of trauma or surgery. Patella baja also can occur postoperatively as a result of scarring and shortening of the patellar tendon, scarring of the patellar tendon to the anterior aspect of the tibia, or both. Another cause of acquired patella baja seen commonly in TKA is elevation of the joint line, referred to as pseudo-patella baja. The patella remains in a normal position relative to the femoral trochlea; however, the distance between the patella and tibia is narrowed. Pseudo-patella baja can be a result of tibial or femoral over-resection, which necessitates a large polyethylene insert. Alterations of the patello-tibial distance can occur during TKA by excessive soft-tissue release that requires elevation of the joint to regain stability and placement of the patellar polyethylene component distally on the patella. Prevention is the easiest way to avoid potential problems with patella baja during TKA; however, the surgeon is often confronted with this situation during total knee revisions. Failure to address patella baja can lead to decreased range of motion (ROM), a decreased lever arm, extensor lag, impingement of the patella against the tibial polyethylene or tibial plate, anterior knee pain, increased energy expenditure, and rupture of the patellar or quadriceps tendons. Treatment of patella baja first depends on determining the cause and distinguishing between patella baja and pseudo-patella baja. Five different methods to measure patella baja are reviewed and include: (1) Blumensaat's line, (2) Insall-Salvati ratio, (3) Modified Insall-Salvati ratio, (4) Blackburne-Peel, and (5) Caton-Deschamps. Corrective measures include reestablishing the joint line by use of distal femoral augments, tibial tubercle osteotomy with proximal displacement, lengthening of the patellar tendon, shaving of the anterior portion of the tibial polyethylene, and placement of the patellar implant in a cephalad position.
低位髌骨可分为先天性、后天性或两者兼而有之,在全膝关节置换术(TKA)中较为常见。先天性低位髌骨是指髌骨相对于股骨滑车位置靠下,且自幼就存在。后天性低位髌骨可能继发于髌骨相对于股骨滑车的远端移位或髌腱缩短,这是由创伤或手术导致的。低位髌骨也可能在术后因髌腱瘢痕形成和缩短、髌腱与胫骨前方粘连或两者皆有而出现。在TKA中常见的后天性低位髌骨的另一个原因是关节线抬高,称为假性低位髌骨。髌骨相对于股骨滑车仍处于正常位置;然而,髌骨与胫骨之间的距离变窄。假性低位髌骨可能是胫骨或股骨过度切除的结果,这需要使用较大的聚乙烯垫片。在TKA过程中,髌胫距离的改变可能是由于过度的软组织松解导致的,这需要抬高关节以恢复稳定性,并将髌骨聚乙烯组件向远端放置在髌骨上。预防是避免TKA期间低位髌骨潜在问题的最简单方法;然而,在全膝关节翻修手术中,外科医生经常会遇到这种情况。未能解决低位髌骨问题可能导致活动范围(ROM)减小、力臂减小、伸肌滞后、髌骨撞击胫骨聚乙烯或胫骨平台、膝前疼痛、能量消耗增加以及髌腱或股四头肌肌腱断裂。低位髌骨的治疗首先取决于确定病因,并区分低位髌骨和假性低位髌骨。本文回顾了五种测量低位髌骨的不同方法,包括:(1)布卢门萨特线,(2)英萨尔 - 萨尔瓦蒂比率,(3)改良英萨尔 - 萨尔瓦蒂比率,(4)布莱克本 - 皮尔法,以及(5)卡顿 - 德尚法。纠正措施包括使用股骨远端垫片重建关节线、胫骨结节截骨并近端移位、延长髌腱、磨削胫骨聚乙烯前部以及将髌骨植入物置于头侧位置。