Predebon J
University of Sydney, Department of Psychology, Sydney, NSW 2006, Australia.
Psychol Res. 2001 Nov;65(4):226-34. doi: 10.1007/s004260100066.
The spatial range of the illusory effects in Müller-Lyer (M-L) figures was examined in three experiments. Experiments 1 and 2 assessed the pattern of bisection errors along the shaft of the standard or double-angle (experiment 1) and the single-angle (experiment 2) M-L figures: Subjects bisected the shaft and the resulting two half-segments of the shaft to produce apparently equal quarters, and then each of the quarters to produce eight equal-appearing segments. The bisection judgments of each segment were referenced to the segment's physical midpoints. The expansion or wings-out and the contraction or wings-in figures yielded similar patterns of bisection errors. For the standard M-L figures, there were significant errors in bisecting each half, and each end-quarter, but not the two central quarters of the shaft. For the single-angle M-L figures, there were significant errors in bisecting the length of the shaft, the half-segment, and the quarter, of the shaft adjacent to the vertex but not the second quarter from the vertex nor in dividing the half of the shaft at the open end of the figure into four equal intervals. Experiment 3 assessed the apparent length of the half-segment of the shaft at the open end of the single-angle figures. Length judgments were unaffected by the vertex at the opposite end of the shaft. Taken together, the results indicate that the length distortions in both the standard and single-angle M-L figures are not uniformly distributed along the shaft but rather are confined mainly to the quarters adjacent to the vertices. The present findings imply that theories of the M-L illusion which assume uniform expansion or contraction of the shafts are incomplete.
在三个实验中研究了缪勒-莱尔(M-L)图形中错觉效应的空间范围。实验1和实验2评估了沿标准或双角(实验1)和单角(实验2)M-L图形的轴的二等分误差模式:受试者将轴二等分,然后将轴的两个所得半段再二等分以产生明显相等的四分之一段,接着将每个四分之一段再二等分以产生八个看起来相等的段。每个段的二等分判断以该段的物理中点为参照。展开或翅膀向外以及收缩或翅膀向内的图形产生了相似的二等分误差模式。对于标准M-L图形,在将每个半段以及每个端部四分之一段二等分时存在显著误差,但在轴的两个中央四分之一段二等分时不存在显著误差。对于单角M-L图形,在将轴的长度、半段以及与顶点相邻的轴的四分之一段二等分时存在显著误差,但在与顶点相邻的第二个四分之一段二等分时不存在显著误差,并且在将图形开口端的轴的一半分成四个相等间隔时也不存在显著误差。实验3评估了单角图形开口端的轴的半段的表观长度。长度判断不受轴另一端顶点的影响。综合来看,结果表明标准和单角M-L图形中的长度扭曲并非沿轴均匀分布,而是主要局限于与顶点相邻的四分之一段。目前的研究结果意味着假设轴均匀膨胀或收缩的M-L错觉理论是不完整的。