Bolch Wesley E, Patton Phillip W, Rajon Didier A, Shah Amish P, Jokisch Derek W, Inglis Benjamin A
Department of Nuclear and Radiological Engineering, University of Florida, Gainesville, Florida 32611-8300, USA.
J Nucl Med. 2002 Jan;43(1):97-108.
Dose assessment to active bone marrow is a critical feature of radionuclide therapy treatment planning. Skeletal dosimetry models currently used to assign radionuclide S values for clinical marrow dose assessment are based on bone and marrow cavity chord-length distributions. Accordingly, these models cannot explicitly consider energy loss to inactive marrow (adipose tissue) during particle transport across the trabecular marrow space (TMS). One method to account for this energy loss is to uniformly scale the resulting TMS absorbed fractions by reference values of site-specific marrow cellularity. In doing so, however, the resulting absorbed fractions for self-irradiation of the trabecular active marrow (TAM) do not converge to unity at low electron source energies. This study attempts to address this issue by using nuclear magnetic resonance microscopy images of trabecular bone to define 3-dimensional (3D) dosimetric models in which explicit spatial distributions of adipose tissue are introduced.
Cadaveric sources of trabecular bone were taken from both the femoral heads and humeral epiphyses of a 51-y-old male subject. The bone sites were sectioned and subsequently imaged at a proton resonance frequency of 200 MHz (4.7 T) using a 3D spin-echo pulse sequence. After image segmentation, voxel clusters of adipocytes were inserted interior to the marrow cavities of the binary images, which were then coupled to the EGS4 radiation transport code for simulation of active marrow electron sources.
Absorbed fractions for self-irradiation of the TAM were tabulated for both skeletal sites. Substantial variations in the absorbed fraction to active marrow are seen with changes in marrow cellularity, particularly in the energy range of 100-500 keV. These variations are seen to be more dramatic in the humeral epiphysis (larger marrow volume fraction) than in the femoral head.
Results from electron transport in 3D models of the trabecular skeleton indicate that current methods to account for marrow cellularity in chord-based models are incomplete. At 10 keV, for example, the Eckerman and Stabin model underestimates the self-absorbed fraction to active marrow by 75%. At 1 MeV, the model of Bouchet et al. overestimates this same value by 40%. In the energy range of 20-200 keV, neither model accurately predicts energy loss to the active bone marrow. Thus, it is proposed that future extensions of skeletal dosimetry models use 3D transport techniques in which explicit delineation of active and inactive marrow is feasible.
对活性骨髓的剂量评估是放射性核素治疗计划的关键特征。目前用于为临床骨髓剂量评估分配放射性核素S值的骨骼剂量测定模型是基于骨骼和骨髓腔弦长分布的。因此,这些模型无法明确考虑粒子穿过小梁骨髓空间(TMS)时对非活性骨髓(脂肪组织)的能量损失。一种考虑这种能量损失的方法是通过特定部位骨髓细胞密度的参考值统一缩放所得的TMS吸收分数。然而,这样做时,小梁活性骨髓(TAM)自辐照的所得吸收分数在低电子源能量下不会收敛到1。本研究试图通过使用小梁骨的核磁共振显微镜图像来定义三维(3D)剂量测定模型来解决这个问题,其中引入了脂肪组织的明确空间分布。
小梁骨的尸体来源取自一名51岁男性受试者的股骨头和肱骨骨骺。将骨部位切片,随后使用3D自旋回波脉冲序列在200 MHz(4.7 T)的质子共振频率下成像。图像分割后,将脂肪细胞的体素簇插入二值图像的骨髓腔内,然后将其与EGS4辐射传输代码耦合以模拟活性骨髓电子源。
列出了两个骨骼部位TAM自辐照的吸收分数。随着骨髓细胞密度的变化,活性骨髓的吸收分数有很大差异,特别是在100 - 500 keV的能量范围内。这些差异在肱骨骨骺(骨髓体积分数较大)中比在股骨头中更为明显。
小梁骨骼3D模型中的电子传输结果表明,基于弦的模型中目前考虑骨髓细胞密度的方法是不完整的。例如,在10 keV时,埃克曼和斯塔宾模型将活性骨髓的自吸收分数低估了75%。在1 MeV时,布歇等人的模型将该值高估了40%。在20 - 200 keV的能量范围内,两个模型都不能准确预测活性骨髓的能量损失。因此,建议骨骼剂量测定模型的未来扩展使用3D传输技术,其中活性和非活性骨髓的明确描绘是可行的。