Time reversed reverberation focusing in a waveguide.

Time reversal mirrors have been applied to focus energy at probe source locations and point scatterers in inhomogeneous media. In this paper, we investigate the application of a time reversal mirror to rough interface reverberation processing in a waveguide. The method is based on the decomposition of the time reversal operator which is computed from the transfer matrix measured on a source-receiver array [Prada et al., J. Acoust. Soc. Am. 99, 2067-2076 (1996)]. In a similar manner, reverberation data collected on a source-receiver array can be filtered through an appropriate temporal window to form a time reversal operator. The most energetic eigenvector of the time reversal operator focuses along the interface at the range corresponding to the filter delay. It is also shown that improved signal-to-noise ratio measurement of the time reversal operator can be obtained by ensonifying the water column with a set of orthogonal array beams. Since these methods do not depend upon a priori environmental information, they are applicable to complex shallow water environments. Numerical simulations with a Pekeris waveguide demonstrate this method.