Suppr超能文献

γ射线辐照超高分子量聚乙烯部件冷冻断裂表面上反映出的氧化诱导形态动态变化。

Oxidation-induced dynamic changes in morphology reflected on freeze-fractured surface of gamma-irradiated ultra-high molecular weight polyethylene components.

作者信息

Watanabe Eiichiro, Suzuki Masahiko, Nagata Kazuya, Kaneeda Toshiaki, Harada Yoshitada, Utsumi Masahiro, Mori Akiko, Moriya Hideshige

机构信息

Department of Orthopaedic Surgery, School of Medicine, Chiba University, 1-8-1 Inohana, Chuo-Ku, Chiba 260-8677, Japan.

出版信息

J Biomed Mater Res. 2002 Dec 15;62(4):540-9. doi: 10.1002/jbm.10357.

Abstract

Oxidative degradation of ultra-high molecular weight polyethylene (UHMWPE) attributed to sterilization by gamma-radiation in the presence of air has been cited as one of the major causes of premature wear in total joint arthroplasty. For example, in retrieved UHMWPE tibial bearings, not only adhesive and abrasive wear, but also fatigue wear characterized by delamination and fracture is frequently observed. In this study, we examined the effects of gamma radiation on the microstructural morphology of UHMWPE tibial bearings, and propose a severe fatigue wear mechanism. Scanning electron microscopic observations were conducted on freeze-fractured surface of retrieved UHMWPE components that had been sterilized with gamma radiation in air before implantation, unused components that had been stored on the shelf for several years (5-11) after sterilization, and disc specimens given an accelerated aging protocol after gamma radiation. Scanning electron microscopic observations showed that the freeze-fractured surface of these components had a double layer, which was bordered below the surface. A closer observation of the subsurface layer below the border revealed an extremely rough and porous honeycomb-like structure. Fourier transform infrared analysis demonstrated that the honeycomb-like region in the subsurface had a high oxidation level. The internal morphology of oxidized UHMWPE was classified into four categories based on the level of the oxidation. According to these results, the morphological changes with oxidative degradation of gamma-irradiated UHMWPEs in the presence of air could consistently be explained as the result of major chemical and physical changes such as increased crystallinity, elevated density, and reduced mechanical strength. We relate the morphological changes caused by oxidative degradation in the subsurface to the location of the origin of fatigue wear in total knee joints.

摘要

在空气中通过伽马辐射进行灭菌导致的超高分子量聚乙烯(UHMWPE)氧化降解,被认为是全关节置换术中过早磨损的主要原因之一。例如,在回收的UHMWPE胫骨轴承中,不仅经常观察到粘着磨损和磨粒磨损,还经常观察到以分层和断裂为特征的疲劳磨损。在本研究中,我们研究了伽马辐射对UHMWPE胫骨轴承微观结构形态的影响,并提出了一种严重的疲劳磨损机制。对植入前在空气中经伽马辐射灭菌的回收UHMWPE部件的冷冻断裂表面、灭菌后在货架上存放数年(5 - 11年)的未使用部件以及伽马辐射后经过加速老化处理的圆盘试样进行了扫描电子显微镜观察。扫描电子显微镜观察表明,这些部件的冷冻断裂表面有一个双层结构,其边界在表面下方。对边界下方的次表层进行更仔细的观察发现,有一个极其粗糙且多孔的蜂窝状结构。傅里叶变换红外分析表明,次表层的蜂窝状区域具有较高的氧化水平。根据氧化程度,将氧化UHMWPE的内部形态分为四类。根据这些结果,在空气中伽马辐照的UHMWPE氧化降解引起的形态变化,可以始终如一地解释为主要化学和物理变化的结果,如结晶度增加、密度升高和机械强度降低。我们将次表层氧化降解引起的形态变化与全膝关节疲劳磨损的起源位置联系起来。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验