Determining humeral retroversion with computed tomography.

BACKGROUND

The purpose of this study was to develop and standardize a technique in which computed tomography images are used to determine the humeral torsion angle with landmarks that can be used during surgery.

METHODS

One hundred and twenty cadaveric humeri were studied. The retroversion of these anatomical specimens was measured on a computed tomography scan and compared with the direct measurements of the specimens. The retroversion of the humerus was measured by determining the orientation of the proximal articular surface of the humerus with respect to the transepicondylar line of the distal part of the humerus and the forearm axis. To evaluate this method of measuring retroversion, the protocol was tested in patients before and after shoulder arthroplasty.

RESULTS

The degree of reproducibility of the measurements made on the computed tomography scan was evaluated by determining the interclass correlation coefficient. The interclass correlation coefficient was considered good (between 0.85 and 0.90) for the measurements of the normal humeri when the orientation of the articular surface measured in the distal part of the humeral head, the epicondylar axis, and the ulnar axis were used as references. There was a significant difference (p < 0.01) between the mean angular orientation of the proximal articular surface with respect to the epicondylar axis (17.6 degrees ) and the mean angular orientation of the proximal articular surface with respect to a line perpendicular to the forearm axis (28.8 degrees ). Despite a wide variation in the humeral torsion angle among the specimens from the different cadavera, the angle varied little between the two normal humeri of the same individual (mean side-to-side difference, 2.1 degrees ).

CONCLUSION

This study demonstrated that retroversion of the proximal part of the humerus can be reliably measured with computed tomography.

CLINICAL RELEVANCE

Determining retroversion with computed tomography is more accurate than palpating the epicondylar axis or using the forearm as a goniometer during surgery. Computed tomography is useful for measuring the amount of rotation of humeri with a malunited fracture or severe arthritic deformity.