Lange Malte, Jonat Susanne, Nikischin Werner
Department of Pediatrics, Children's Hospital, University of Kiel, Kiel, Germany.
Pediatr Pulmonol. 2002 Dec;34(6):455-61. doi: 10.1002/ppul.10200.
Due to the short airways in premature children, an accurate position of the endotracheal tube (ETT) is crucial for adequate mechanical ventilation. Verification of ETT-position is done in chest radiographs. However, ETT-position varies substantially with head movement. When the head is flexed, the tube might appear too deeply inserted, and inadvertent extubation may occur in cases of retraction of ETT after radiography. Extension of the cervical spine will suggest an inappropriately high ETT-position, so that intended corrections can lead to main-stem intubation. Radiographic visible skeletal structures could serve as reference points to allow the detection of head declination and imperfect positioning of ETT. Ratios of anatomical landmarks were used to estimate head position. In this study, 111 radiographs of 24 preterm neonates with a gestational age of 24-29 weeks and weights of 500-1,000 g were analyzed. A mathematical algorithm for the detection and correction of ETT-positions, based on common chest radiographs, was developed. In 108 cases (97.3%), ETT-distance from the midtracheal level was less than 2 mm after use of the proposed correction.Thus, the suggested correction equation for head position enables verification of the actual ETT-position without requiring a defined placement of the head during radiography. Moreover, it can be helpful for estimating the depth of ETT-insertion in conditions when radiography is not available.
由于早产儿气道较短,气管内插管(ETT)的准确位置对于充分的机械通气至关重要。ETT位置的确认通过胸部X光片进行。然而,ETT位置会随着头部移动而大幅变化。当头部屈曲时,导管可能看起来插入过深,并且在X光检查后ETT回缩的情况下可能发生意外拔管。颈椎伸展则提示ETT位置过高,因此预期的校正可能导致主支气管插管。X光可见的骨骼结构可作为参考点,以检测头部倾斜和ETT定位不当。使用解剖标志的比例来估计头部位置。在本研究中,分析了24例胎龄为24 - 29周、体重为500 - 1000克的早产儿的111张X光片。基于普通胸部X光片,开发了一种用于检测和校正ETT位置的数学算法。使用建议的校正方法后,在108例(97.3%)中,ETT与气管中点水平的距离小于2毫米。因此,建议的头部位置校正方程能够在不需要在X光检查期间定义头部位置的情况下验证实际的ETT位置。此外,在无法进行X光检查的情况下,它有助于估计ETT的插入深度。