Suppr超能文献

放射治疗的立体定向成像:CT、MRI、PET和SPECT的准确性。

Stereotactic imaging for radiotherapy: accuracy of CT, MRI, PET and SPECT.

作者信息

Karger Christian P, Hipp Peter, Henze Marcus, Echner Gernot, Höss Angelika, Schad Lothar, Hartmann Günther H

机构信息

Deutsches Krebsforschungszentrum, Abteilung Medizinische Physik. Im Neuenheimer Feld 280, D-69120 Heidelberg, Germany.

出版信息

Phys Med Biol. 2003 Jan 21;48(2):211-21. doi: 10.1088/0031-9155/48/2/305.

Abstract

CT, MRI, PET and SPECT provide complementary information for treatment planning in stereotactic radiotherapy. Stereotactic correlation of these images requires commissioning tests to confirm the localization accuracy of each modality. A phantom was developed to measure the accuracy of stereotactic localization for CT, MRI, PET and SPECT in the head and neck region. To this end. the stereotactically measured coordinates of structures within the phantom were compared with their mechanically defined coordinates. For MRI, PET and SPECT, measurements were performed using two different devices. For MRI, T1- and T2-weighted imaging sequences were applied. For each measurement, the mean radial deviation in space between the stereotactically measured and mechanically defined position of target points was determined. For CT, the mean radial deviation was 0.4 +/- 0.2 mm. For MRI, the mean deviations ranged between 0.7 +/- 0.2 mm and 1.4 +/- 0.5 mm, depending on the MRI device and the imaging sequence. For PET, mean deviations of 1.1 +/- 0.5 mm and 2.4 +/- 0.3 mm were obtained. The mean deviations for SPECT were 1.6 +/- 0.5 mm and 2.0 +/- 0.6 mm. The phantom is well suited to determine the accuracy of stereotactic localization with CT, MRI, PET and SPECT in the head and neck region. The obtained accuracy is well below the physical resolution for CT, PET and SPECT, and of comparable magnitude for MRI. Since the localization accuracy may be device dependent, results obtained at one device cannot be generalized to others.

摘要

CT、MRI、PET和SPECT为立体定向放射治疗的治疗计划提供了互补信息。这些图像的立体定向相关性需要进行调试测试,以确认每种模态的定位准确性。开发了一种体模,用于测量头颈部区域CT、MRI、PET和SPECT的立体定向定位准确性。为此,将体模内结构的立体定向测量坐标与其机械定义坐标进行比较。对于MRI、PET和SPECT,使用两种不同的设备进行测量。对于MRI,应用了T1加权和T2加权成像序列。对于每次测量,确定目标点的立体定向测量位置与机械定义位置在空间中的平均径向偏差。对于CT,平均径向偏差为0.4±0.2毫米。对于MRI,平均偏差根据MRI设备和成像序列在0.7±0.2毫米至1.4±0.5毫米之间。对于PET,获得的平均偏差为1.1±0.5毫米和2.4±0.3毫米。SPECT的平均偏差为1.6±0.5毫米和2.0±0.6毫米。该体模非常适合确定头颈部区域CT、MRI、PET和SPECT的立体定向定位准确性。所获得的准确性远低于CT、PET和SPECT的物理分辨率,与MRI的相当。由于定位准确性可能取决于设备,在一台设备上获得的结果不能推广到其他设备。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验