Suppr超能文献

用于经关节螺钉固定手术规划的枢椎轴线的解剖学研究

Anatomic study of the axis for surgical planning of transarticular screw fixation.

作者信息

Igarashi Tamaki, Kikuchi Shinichi, Sato Katsuhiko, Kayama Satoru, Otani Koji

机构信息

Department of Orthopaedic Surgery, Fukushima Medical University, School of Medicine, Fukushima City, Japan.

出版信息

Clin Orthop Relat Res. 2003 Mar(408):162-6. doi: 10.1097/00003086-200303000-00020.

Abstract

Transarticular screw fixation has shown increased stability compared with other posterior stabilization techniques. However, there have been few reports on vertebral artery injury related to the screw insertion. The current study measured the parameters of the pedicle and vertebral artery groove of the axis and clarified the accuracy and safety of the transarticular screw fixation. Direct measurements were taken from 98 dry axis vertebrae. The width and height of the pedicle were measured. The mediolateral and anteroposterior dimensions of the vertebral artery groove also were measured. Forty-one percent had asymmetry. In 20% of the specimens, the pedicle was smaller than the diameter of the screw (3.5 mm). The pedicle of the axis has large anatomic variability and asymmetry. Some pedicles were not suitable for atlantoaxial transarticular screw fixation. The risks associated with screw fixation should be prevented by preoperative computed tomography with three-dimensional reconstruction. Screw trajectory reconstruction with coronal and sagittal reconstruction is useful to evaluate the pedicle width and height.

摘要

与其他后路稳定技术相比,经关节螺钉固定已显示出更高的稳定性。然而,关于螺钉植入相关椎动脉损伤的报道很少。本研究测量了枢椎椎弓根和椎动脉沟的参数,并阐明了经关节螺钉固定的准确性和安全性。对98个干燥的枢椎椎体进行直接测量。测量椎弓根的宽度和高度。还测量了椎动脉沟的内外侧和前后径。41%存在不对称。在20%的标本中,椎弓根小于螺钉直径(3.5毫米)。枢椎椎弓根具有较大的解剖变异性和不对称性。一些椎弓根不适合寰枢椎经关节螺钉固定。术前计算机断层扫描三维重建应可预防与螺钉固定相关的风险。采用冠状面和矢状面重建的螺钉轨迹重建有助于评估椎弓根的宽度和高度。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验