Suppr超能文献

距下关节轴的位置及后足旋后的阻力

Position of the subtalar joint axis and resistance of the rearfoot to supination.

作者信息

Payne Craig, Munteanu Shannon, Miller Kathryn

机构信息

Department of Podiatry, School of Human Biosciences, La Trobe University, Victoria, Australia.

出版信息

J Am Podiatr Med Assoc. 2003 Mar-Apr;93(2):131-5. doi: 10.7547/87507315-93-2-131.

Abstract

Determination of the position of the subtalar joint axis is being more widely used clinically to facilitate the prescription of foot orthoses and the understanding of foot function, but clinical determination of the axis has not been widely investigated. The aim of this study was to determine the relationship between clinical determination of the subtalar joint axis and the amount of force needed to supinate the foot. The transverse plane position of the subtalar joint axis was determined in 47 subjects. The sagittal plane orientation of the subtalar joint axis was determined using the relative amounts of forefoot adduction and abduction obtained when the rearfoot was supinated and pronated. The amount of force needed to supinate the foot was measured using a device designed to measure resistance to supination. The only two parameters that were correlated to supination resistance of the rearfoot were body weight (r = 0.52) and the perpendicular distance from the fifth metatarsal head to the subtalar joint axis (r = 0.59). The model on which determination of the subtalar joint axis is based may not be valid, but it might help determine how much force is needed to supinate a foot using foot orthoses.

摘要

距下关节轴位置的确定在临床上得到了更广泛的应用,以方便足部矫形器的处方和对足部功能的理解,但该轴的临床确定尚未得到广泛研究。本研究的目的是确定距下关节轴的临床确定与足部旋后所需力量之间的关系。在47名受试者中确定了距下关节轴的横平面位置。通过在后足旋后和旋前时获得的前足内收和外展的相对量来确定距下关节轴的矢状面方向。使用一种设计用于测量旋后阻力的装置测量足部旋后所需的力量。与后足旋后阻力相关的仅有的两个参数是体重(r = 0.52)和从第五跖骨头到距下关节轴的垂直距离(r = 0.59)。距下关节轴确定所基于的模型可能无效,但它可能有助于确定使用足部矫形器使足部旋后需要多大的力量。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验