Suppr超能文献

[温度控制下城市生活垃圾堆肥过程三个阶段接种复合微生物群落的变化]

[The variation of inoculation complex microbial community in three stages MSW composting process controlled by temperature].

作者信息

Xi Beidou, Meng Wei, Liu Hongliang, Huang Guohe, Zeng Guangming, Wang Qi

机构信息

Chinese Research Academy of Environmental Science, Beijing 100012, China.

出版信息

Huan Jing Ke Xue. 2003 Mar;24(2):152-5.

Abstract

Adding inoculation agent is one of the effective methods to accelerate the composting process of municipal solid wastes. However, because of the competing of indigenous microorganisms, high concentration of existing indigenous microorganisms could inhibit the prevalence of inoculating microorganisms. When indigenous microorganisms concentration in the raw material was 4 x 10(8) CFU/g, the microorganisms of inoculating did not grow up. With the process, the microbial population of inoculation declined rapidly and no-inoculating microbial population rose up quickly and reached a peak of 10(10) CFU/g. When indigenous microorganisms concentration was 4 x 10(5) CFU/g, the microorganisms of inoculation could inhibit the prevalence of the indigenous microorganisms and inoculating microbial population increased quickly and reached a peak of 10(11) CFU/g. Therefore, this paper introduces a method of three stages composting technology, which combined the heat produced from composting system and some extra energy, and heated up the composting temperature above 75 degrees C in 4 hours as well as maintaining for 8 hours. It well controlled the concentration of the indigenous microorganisms under 4 x 10(5) CFU/g and improve the structure of the compost media and make the remaining solids more amenable to biological attack. When composting materials temperature drops to 35 degrees C to 45 degrees C, add complex microorganisms in composting process. Then they develop more quickly than the others, the concentration of them rose up from 10(8) CFU/g to 10(11) CFU/g and lie in a preponderate position. So with this method, advanced the rate of organic degradation in municipal solid wastes (MSW) composting process, and enhanced the numbers of inoculation microorganisms in composting products. Therefore, they can be as inoculation agent for improving composting conditions, speedup the next composting process, cutting down the composting time, saving original inoculation agent and making composting more economic. But using compost products as inoculum, with the number of feedback increasing, the concentration ratio of inoculation microorganisms and no-inoculation microorganisms is around 1:3 (fifth feedback compost products). So, the number of feedback compost products should not be more than five.

摘要

添加接种剂是加速城市固体废物堆肥过程的有效方法之一。然而,由于本地微生物的竞争,高浓度的现有本地微生物会抑制接种微生物的繁殖。当原料中本地微生物浓度为4×10⁸CFU/g时,接种的微生物无法生长。随着过程的进行,接种的微生物种群迅速下降,未接种的微生物种群迅速上升并达到10¹⁰CFU/g的峰值。当本地微生物浓度为4×10⁵CFU/g时,接种的微生物可以抑制本地微生物的繁殖,接种的微生物种群迅速增加并达到10¹¹CFU/g的峰值。因此,本文介绍了一种三阶段堆肥技术方法,该方法结合了堆肥系统产生的热量和一些额外能量,在4小时内将堆肥温度加热到75℃以上并保持8小时。它很好地将本地微生物浓度控制在4×10⁵CFU/g以下,改善了堆肥介质的结构,使剩余固体更易于生物分解。当堆肥物料温度降至35℃至45℃时,在堆肥过程中添加复合微生物。然后它们比其他微生物生长得更快,其浓度从10⁸CFU/g上升到10¹¹CFU/g并占据优势地位。所以采用这种方法,提高了城市固体废物(MSW)堆肥过程中有机物的降解速率,增加了堆肥产品中接种微生物的数量。因此,它们可以作为接种剂来改善堆肥条件,加速下一个堆肥过程,缩短堆肥时间,节省原始接种剂并使堆肥更经济。但是使用堆肥产品作为接种物,随着反馈次数的增加,接种微生物与未接种微生物的浓度比约为(第五次反馈堆肥产品)1:3。所以,反馈堆肥产品的次数不应超过五次。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验