Chrétien Antony, Chataigner Isabelle, L'Hélias Nathalie, Piettre Serge R
Laboratoire des Fonctions Azotées et Oxygénées Complexes, UMR CNRS 6014, IRCOF-Université de Rouen, Rue Tesnières, F-76821 Mont Saint Aignan, France.
J Org Chem. 2003 Oct 17;68(21):7990-8002. doi: 10.1021/jo034719b.
The reaction between indole-3-carboxaldehyde 1a or indole-3-glyoxalate 1b and 2,3-dimethylbutadiene under thermal activation leads exclusively to the Diels-Alder cycloadducts resulting from the participation of the indole 2,3-carbon-carbon double bond. The concomitant use of zinc chloride and high pressure (16 kbar) induces the primary cycloadduct to react further, and biscycloadducts 11 and 12 are now isolated in high yields, the result of two consecutive [4 + 2] processes on, first, the indole 2,3 C=C bond and, second, the 3-carbonyl unit. The possibility of using two different dienes in a tandem, sequential process is demonstrated by the preparation of tetracycle 13. Interactions between the carbonyl dienophile and Danishefsky diene yield exclusively yet another type of product, namely the gamma-dihydropyranones arising from the sequential [4 + 2] heterocycloaddition, hydrolysis of the silyl enol ether, and loss of methanol. Isolation of the Mukaiyama-type adduct 16 indicates that a stepwise mechanism may be involved, at least under zinc chloride catalysis. N,N-Disubstituted indole-3-glyoxamides undergo the expected, usual Diels-Alder process, with the 2,3 C=C bond acting as dienophile, and cycloadducts of the type 3 are obtained in high yields, regardless of the mode of activation. Remarkably, however, N-monosubstituted indole-3-glyoxamides react almost exclusively as heterodienophiles, the 3-carbonyl unit being now the preferred site of reactivity, and gamma-dihydropyranones of the type 6 are isolated in yields ranging from 72 to 92%. Conformational analysis of the Diels-Alder adducts based on both (1)H NMR spectrometry and X-ray diffraction data indicates that the newly created cyclohexene and cyclohexanone rings adopt a pseudoboat conformation.
吲哚 - 3 - 甲醛1a或吲哚 - 3 - 乙醛酸酯1b与2,3 - 二甲基丁二烯在热活化条件下反应,仅生成因吲哚2,3 - 碳 - 碳双键参与反应而产生的狄尔斯 - 阿尔德环加成产物。同时使用氯化锌和高压(16 kbar)会促使初级环加成产物进一步反应,现在可以高收率分离得到双环加成产物11和12,这是首先在吲哚2,3 C = C键上,然后在3 - 羰基单元上连续进行两个[4 + 2]反应的结果。通过制备四环化合物13证明了在串联、顺序过程中使用两种不同二烯的可能性。羰基亲双烯体与达尼谢夫斯基二烯之间的相互作用仅产生另一种类型的产物,即通过连续的[4 + 2]杂环加成、硅烯醇醚水解和甲醇消除而生成的γ - 二氢吡喃酮。分离得到的向山型加合物16表明,至少在氯化锌催化下可能涉及逐步机理。N,N - 二取代的吲哚 - 3 - 乙二酰胺发生预期的常规狄尔斯 - 阿尔德反应,2,3 C = C键作为亲双烯体,无论活化方式如何,都能以高收率得到3型环加成产物。然而,值得注意的是,N - 单取代的吲哚 - 3 - 乙二酰胺几乎完全作为杂亲双烯体反应,此时3 - 羰基单元是优先反应位点,并且可以以72%至92%的收率分离得到6型γ - 二氢吡喃酮。基于(1)H NMR光谱和X射线衍射数据对狄尔斯 - 阿尔德加成物进行的构象分析表明,新形成的环己烯和环己酮环采用假船式构象。