Arnold G E, Ornstein R L
Molecular Science Research Center, Pacific Northwest Laboratory, Richland, WA 99352.
Protein Eng. 1992 Oct;5(7):703-14. doi: 10.1093/protein/5.7.703.
An analysis of a 400 ps molecular dynamics simulation of the 164 amino acid enzyme T4 lysozyme is presented. The simulation was carried out with all hydrogen atoms modeled explicitly, the inclusion of all 152 crystallographic waters and at a temperature of 300 K. Temporal analysis of the trajectory versus energy, hydrogen bond stability, r.m.s. deviation from the starting crystal structure and radius of gyration, demonstrates that the simulation was both stable and representative of the average experimental structure. Average structural properties were calculated from the enzyme trajectory and compared with the crystal structure. The mean value of the C alpha displacements of the average simulated structure from the X-ray structure was 1.1 +/- 0.1 A; differences of the backbone phi and psi angles between the average simulated structure and the crystal structure were also examined. Thermal-B factors were calculated from the simulation for heavy and backbone atoms and both were in good agreement with experimental values. Relationships between protein secondary structure elements and internal motions were studied by examining the positional fluctuations of individual helix, sheet and turn structures. The structural integrity in the secondary structure units was preserved throughout the simulation; however, the A helix did show some unusually high atomic fluctuations. The largest backbone atom r.m.s. fluctuations were found in non-secondary structure regions; similar results were observed for r.m.s. fluctuations of non-secondary structure phi and psi angles. In general, the calculated values of r.m.s. fluctuations were quite small for the secondary structure elements. In contrast, surface loops and turns exhibited much larger values, being able to sample larger regions of conformational space. The C alpha difference distance matrix and super-positioning analyses comparing the X-ray structure with the average dynamics structure suggest that a 'hinge-bending' motion occurs between the N- and C-terminal domains.
本文展示了对含有164个氨基酸的T4溶菌酶进行的400皮秒分子动力学模拟分析。该模拟明确构建了所有氢原子模型,纳入了全部152个晶体学水分子,且温度为300K。对轨迹与能量、氢键稳定性、相对于起始晶体结构的均方根偏差以及回转半径进行的时间分析表明,该模拟既稳定又能代表平均实验结构。根据酶轨迹计算平均结构特性,并与晶体结构进行比较。平均模拟结构相对于X射线结构的Cα位移平均值为1.1±0.1埃;还研究了平均模拟结构与晶体结构之间主链φ和ψ角的差异。通过模拟计算了重原子和主链原子的热B因子,二者均与实验值吻合良好。通过检查单个螺旋、片层和转角结构的位置波动,研究了蛋白质二级结构元件与内部运动之间的关系。在整个模拟过程中,二级结构单元的结构完整性得以保留;然而,A螺旋确实表现出一些异常高的原子波动。在非二级结构区域发现了最大的主链原子均方根波动;非二级结构φ和ψ角的均方根波动也观察到类似结果。一般来说,二级结构元件的均方根波动计算值相当小。相比之下,表面环和转角表现出大得多的值,能够采样更大的构象空间区域。比较X射线结构与平均动力学结构的Cα差异距离矩阵和叠加分析表明,在N端和C端结构域之间发生了“铰链弯曲”运动。