Moore Tara L, Gibson Lorna J
Harvard-MIT Division of Health Sciences and Technology, Massachusetts Institute of Technology, Cambridge, MA 02139, USA.
J Biomech Eng. 2003 Dec;125(6):769-76. doi: 10.1115/1.1631584.
Microdamage, in the form of small cracks, may accumulate in trabecular bone loaded in fatigue. Specimens of bovine trabecular bone were loaded in compressive fatigue at one of four normalized stresses and loading was stopped after the specimens reached one of six maximum strains. Microdamage was identified using a fluorochrome staining technique, and microdamage parameters, including the number of damaged trabeculae and the damaged area fraction, were measured. No microdamage was observed during loading to strains below the yield strain; at higher strains, all microdamage parameters increased with increasing maximum compressive strain. Few significant differences were observed in the type or amount of microdamage accumulation between specimens loaded to the same maximum strain at different normalized stresses; however, more trabecular fractures were observed at high numbers of cycles, which corresponded to low normalized stresses.
微损伤以小裂纹的形式出现,可能会在承受疲劳载荷的小梁骨中累积。牛小梁骨标本在四个归一化应力之一的条件下进行压缩疲劳加载,当标本达到六个最大应变之一时停止加载。使用荧光染料染色技术识别微损伤,并测量微损伤参数,包括受损小梁的数量和受损面积分数。在加载到屈服应变以下的应变时未观察到微损伤;在较高应变下,所有微损伤参数均随最大压缩应变的增加而增加。在不同归一化应力下加载到相同最大应变的标本之间,微损伤累积的类型或数量几乎没有显著差异;然而,在高循环次数时观察到更多的小梁骨折,这对应于低归一化应力。