Benalla H, Zajac J
Laboratoire des Agrégats Moléculaires et Matériaux Inorganiques, UMR 5072, Université Montpellier 2, Place E. Bataillon, 34095 Montpellier Cedex 5, France.
J Colloid Interface Sci. 2004 Apr 15;272(2):253-61. doi: 10.1016/j.jcis.2003.10.037.
Titration calorimetry has been used to study the effect of the addition of two primary alcohols, 1-butanol and 1-heptanol, to the aqueous phase on the thermal effects of micellization of benzyldimethyldodecylammonium bromide (BDDAB) as well as its adsorption onto nonporous Spherosil XO15M and onto porous aluminosilicate SiAl32d22 possessing uniformly sized mesopores. A linear decrease of the critical micelle concentration (CMC) of the cationic surfactant with the additive content was inferred from the specific conductivity measurements. All adsorption and calorimetry experiments were carried out at 298 K and at a fixed alcohol content (0.01 mol kg(-1)) either in deionized water or in a 0.01 mol kg(-1) NaBr solution. Dilution calorimetry measurements allowed determination of the cumulative molar enthalpy changes and a new analysis of these data was proposed to calculate easily the enthalpy of micellization per mole of BDDAB, Delta(mic)h, and the CMC value. The alcohol addition was shown to render the micellization phenomenon more exothermic, the effect being larger as the chain length of alcohol increased. These effects were attributed to the location of alcohol molecules between the surfactant units, their hydroxyl groups close to the surfactant head-groups, in competition with the surfactant counterions. The individual isotherms of alcohol and surfactant adsorption onto XO15M and SiAl32d22 were determined. The plots of the pseudo-differential molar enthalpy of displacement, Delta(dpl)h, against the surface coverage by the surfactant cation, Theta(BDDA+), were derived from the titration calorimetry data. The formation of surface-bound aggregates was thought to be a prerequisite for alcohol coadsorption at the solid-solution interface. At least two different types of adsolubilization sites were postulated, one of the sites being the same as in micelles and the other related to the contact area between the hydrophobic surfactant tails and the equilibrium bulk solution. Coadsorption (adsolubilization) of alcohol molecules at such sites was found to increase the exothermic contribution to the enthalpy of displacement per mole of the BDDA+ adsorbed.
滴定量热法已被用于研究向水相中添加两种伯醇(1 - 丁醇和1 - 庚醇)对苄基二甲基十二烷基溴化铵(BDDAB)胶束化热效应及其在无孔Spherosil XO15M和具有均匀尺寸介孔的多孔硅铝酸盐SiAl32d22上吸附的影响。从电导率测量推断出阳离子表面活性剂的临界胶束浓度(CMC)随添加剂含量呈线性下降。所有吸附和量热实验均在298 K以及固定的醇含量(0.01 mol kg⁻¹)下进行,溶剂为去离子水或0.01 mol kg⁻¹的NaBr溶液。稀释量热法测量可确定累积摩尔焓变,并提出了对这些数据的新分析方法,以便轻松计算每摩尔BDDAB的胶束化焓Δ(mic)h和CMC值。结果表明,添加醇会使胶束化现象放热更多,且随着醇链长度增加,这种效应更大。这些效应归因于醇分子位于表面活性剂单元之间,其羟基靠近表面活性剂头基,与表面活性剂抗衡离子竞争有关。测定了醇和表面活性剂在XO15M和SiAl32d22上的各自吸附等温线。由滴定量热法数据得出了置换的伪微分摩尔焓Δ(dpl)h对表面活性剂阳离子表面覆盖率θ(BDDA⁺)的曲线。表面结合聚集体的形成被认为是醇在固 - 液界面共吸附的先决条件。推测至少存在两种不同类型的增溶位点,其中一个位点与胶束中的位点相同,另一个与疏水表面活性剂尾部和平衡本体溶液之间的接触区域有关。发现醇分子在这些位点的共吸附(增溶)会增加每摩尔吸附的BDDA⁺置换焓的放热贡献。