Tria Alfred J
Department of Orthopaedic Surgery, Robert Wood Johnson Medical School, 1527 State Highway 27, Suite 1300, Somerset, NJ 08873, USA.
Orthop Clin North Am. 2004 Apr;35(2):227-34. doi: 10.1016/S0030-5898(03)00118-4.
MIS TKA is in the early stages of development. There are many opponents who believe that the technique is nothing more than a cosmetic modification of the standard TKA that leads to more complications and less patient satisfaction. It is important to respect these comments and to thoroughly address them. MIS surgery should not be based on the length of the incision or the cosmetic result. The term "minimally invasive" should refer to the extent of disruption of the anatomic structures about the involved joint. In the knee, the MIS approach should not violate the extensor mechanism and should not violate the suprapatellar pouch. MIS should be a capsular approach, and as such it should produce less discomfort and a faster recovery. Modifications of the MIS technique that extend the arthrotomy into the extensor mechanism, violate the suprapatellar pouch, and evert the patella while using a limited incision are not truly minimally invasive. The MIS procedure should allow the patient to recover faster while keeping the incidence of complications at the same or lower levels as the open procedure. There will certainly be a learning curve for this operation and a smaller incision with standard TKA techniques maybe the interim step for the surgeon attempting to master the new approach. MIS TKA must be performed with accurate instruments that are coordinated with the procedure. It is not possible to perform the operation with the traditional instruments that have been made for the open operations. The older instruments do not fit into the knee joint and do not allow visualization of the joint at the same time that the cuts and balancing are performed. The visual appearance is totally different and new. The surgeon must learn a completely new image of the knee joint while continuing to apply the basic principles that have been well established. The instruments are a critical part of this new technology and are central to its success. There is no room for guessing or "eye balling" the bone cuts or the alignment and balancing. Instruments and computer-assisted technology will help advance MIS surgery in the next few years. The results of MIS TKA must be thoroughly studied and compared with the existing literature. The author has tried to advance this development ina logical fashion. The initial step was to design instruments that would allow implantation of the presently accepted knee prostheses. This step has now been completed; however, the operation is not simple and is time consuming. The next step therefore is to change the prostheses to facilitate the surgery. The femoral and tibial components are presently too large for the working incision. They are now being modified so that they can be implanted in two or more pieces. This will permit less soft tissue dissection and work better with the smaller incision. The final step will incorporate computer navigational systems. All of the present instruments are designed with attachments for the appropriate arrays to interact with these systems. Ideally, the computer image will allow precise visualization of the knee, particularly the lateral side. All new surgical approaches and devices must be introduced with the expectation to improve the surgical results. There is no doubt that the final goal of this work should be technical improvement without early clinical failures or complications.
微创全膝关节置换术(MIS TKA)尚处于发展初期。有许多反对者认为,该技术不过是对标准全膝关节置换术的一种表面改良,会导致更多并发症且患者满意度更低。重视并全面回应这些意见很重要。微创外科手术不应仅基于切口长度或外观效果。“微创”一词应指对受累关节周围解剖结构的破坏程度。在膝关节手术中,微创入路不应破坏伸膝装置,也不应侵犯髌上囊。微创应采用经关节囊入路,如此应能减少不适并加快恢复。若在有限切口下将关节切开扩展至伸膝装置、侵犯髌上囊或翻转髌骨,这些对微创技术的改良并非真正的微创。微创操作应能让患者更快恢复,同时使并发症发生率与开放手术相当或更低。当然,该手术会有一个学习曲线,对于试图掌握新方法的外科医生而言,采用标准全膝关节置换技术做较小切口可能是过渡阶段。微创全膝关节置换术必须使用与手术相匹配的精确器械来进行。用传统的开放手术器械无法完成该手术。旧器械不适合膝关节,在进行截骨和平衡操作时无法同时实现关节可视化。视觉呈现完全不同且新颖。外科医生在继续应用已确立的基本原则的同时,必须学习全新的膝关节图像。器械是这项新技术的关键部分,对其成功至关重要。在进行骨截骨、对线和平衡操作时,没有猜测或“凭经验”操作的空间。器械和计算机辅助技术将在未来几年推动微创外科手术发展。必须对微创全膝关节置换术的结果进行全面研究,并与现有文献进行比较。作者一直试图以合乎逻辑的方式推动这一发展。第一步是设计能植入当前被认可的膝关节假体的器械。这一步现已完成;然而,手术并不简单且耗时。因此下一步是改进假体以方便手术。目前的股骨和胫骨组件对于工作切口来说太大。现在正在对其进行改良,使其能分成两块或更多块植入。这将减少软组织剥离,并更适合较小的切口。最后一步将纳入计算机导航系统。所有现有器械都设计有与适当阵列的附件,以便与这些系统交互。理想情况下,计算机图像将能精确呈现膝关节,尤其是外侧。所有新的手术方法和器械在引入时都应期望能改善手术效果。毫无疑问,这项工作的最终目标应该是在不出现早期临床失败或并发症的情况下实现技术改进。