Murray C A, Parsons S A
School of Water Sciences, Cranfield University, Cranfield, Bedfordshire, MK43 0AL, UK.
Water Sci Technol. 2004;49(4):267-72.
Control of disinfection by-products during water treatment is primarily achieved by reducing the levels of organic precursor species prior to chlorination. Many waters contain natural organic matter at levels up to 15 mg L(-1); therefore it is necessary to have a range of control methods to support conventional coagulation. Advanced oxidation processes are such processes and in this paper the Fenton and photo-Fenton processes along with photocatalysis are assessed for their NOM removal potential. The performance of each process is shown to be dependent on pH and chemical dose as well as the initial NOM concentration. Under optimum conditions the processes achieved greater than 90% removal of DOC and UV254 absorbance. This removal led to the THMFP of the source water being reduced from 140 to below 10 microg L(-1), well below UK and US standards. An economic assessment of the processes revealed that currently such processes are not economic. With advances in technology and tightening of water quality standards these processes should become economically feasible options.
在水处理过程中,控制消毒副产物主要是通过在氯化之前降低有机前驱体物质的水平来实现的。许多水体中天然有机物的含量高达15 mg L(-1);因此,有必要采用一系列控制方法来辅助传统的混凝过程。高级氧化工艺就是这样的工艺,本文评估了芬顿和光芬顿工艺以及光催化工艺去除天然有机物的潜力。结果表明,每个工艺的性能都取决于pH值、化学药剂投加量以及初始天然有机物浓度。在最佳条件下,这些工艺对溶解性有机碳(DOC)和UV254吸光度的去除率均超过90%。这种去除使得原水的三卤甲烷生成潜力(THMFP)从140微克/升降至10微克/升以下,远低于英国和美国的标准。对这些工艺的经济评估表明,目前这些工艺并不经济。随着技术的进步和水质标准的收紧,这些工艺应该会成为经济可行的选择。