Suppr超能文献

体内皮下植入涂有碳氮化钛的聚合物后组织-植入物反应的细胞学评估。

Cytological evaluation of the tissue-implant reaction associated with subcutaneous implantation of polymers coated with titaniumcarboxonitride in vivo.

作者信息

Lehle Karla, Lohn Stefan, Reinerth G Günter, Schubert Thomas, Preuner J G Jürgen G, Birnbaum D E Dietrich E

机构信息

Clinic of Cardiothoracic Surgery, University Hospital Regensburg, Franz-Josef-Strauss-Allee 11, Regensburg 93042, Germany.

出版信息

Biomaterials. 2004 Nov;25(24):5457-66. doi: 10.1016/j.biomaterials.2003.12.055.

Abstract

The aim of the present study was to evaluate the influence of titanium-coated polymers on the inflammatory response and remodeling of connective tissue during wound-healing processes. Discs of polyethyleneterephthalate (PET) and silicone as well as high-weight meshes of polypropylene (PP) were coated with a titaniumcarboxonitride (Ti(C,N,O)) layer by a plasma-assisted chemical vapor deposition process (PACVD) and implanted subcutaneously in the dorsal lumbar region of Wistar rats. Light microscopic and histological evaluation of capsule thickness, capsule quality, implant-tissue interface and collagen composition was performed 7, 14, 21 and 28 days post-operatively. All implants were surrounded by a fibrous capsule with decreasing thickness after 2-4 weeks post-implantation. Titaniumcarboxonitride-coated polymers showed no significant differences in capsule thickness and inflammatory cellular response. An increased collagen type III/I ratio, especially for titaniumcarboxonitride-coated materials, was found in week one after implantation remaining elevated up to week 4. This might be associated with disordered collagen metabolism and immature scar reaction. In contrast to previous in vitro experiments, Ti-coating of polymers did not improve biocompatibility after subcutaneous implantation in rats. Material reduction to low-weight meshes and enlargement of pore size may demonstrate a benefit of Ti-coated meshes with an increased biocompatibility.

摘要

本研究的目的是评估钛涂层聚合物在伤口愈合过程中对结缔组织炎症反应和重塑的影响。通过等离子体辅助化学气相沉积工艺(PACVD)将聚对苯二甲酸乙二酯(PET)和硅酮圆盘以及聚丙烯(PP)的高重量网片涂上碳氮化钛(Ti(C,N,O))层,并皮下植入Wistar大鼠的背腰部区域。在术后7、14、21和28天对包膜厚度、包膜质量、植入物-组织界面和胶原蛋白组成进行光学显微镜和组织学评估。所有植入物在植入后2-4周后均被纤维包膜包围,包膜厚度逐渐减小。碳氮化钛涂层聚合物在包膜厚度和炎症细胞反应方面没有显著差异。在植入后第1周发现III型/ I型胶原蛋白比例增加,特别是对于碳氮化钛涂层材料,这种增加一直持续到第4周。这可能与胶原蛋白代谢紊乱和不成熟的瘢痕反应有关。与先前的体外实验相反,聚合物的钛涂层在大鼠皮下植入后并没有提高生物相容性。将材料减少到低重量网片并扩大孔径可能表明钛涂层网片具有增加生物相容性的益处。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验