Suppr超能文献

使用荧光增强光学断层扫描技术对乳腺癌进行诊断成像:体模研究

Diagnostic imaging of breast cancer using fluorescence-enhanced optical tomography: phantom studies.

作者信息

Godavarty A, Thompson A B, Roy R, Gurfinkel M, Eppstein M J, Zhang C, Sevick-Muraca E M

机构信息

Photon Migration Laboratory, Texas A&M University, College Station, TX 77843-3573, USA.

出版信息

J Biomed Opt. 2004 May-Jun;9(3):488-96. doi: 10.1117/1.1691027.

Abstract

Molecular targeting with exogenous near-infrared excitable fluorescent agents using time-dependent imaging techniques may enable diagnostic imaging of breast cancer and prognostic imaging of sentinel lymph nodes within the breast. However, prior to the administration of unproven contrast agents, phantom studies on clinically relevant volumes are essential to assess the benefits of fluorescence-enhanced optical imaging in humans. Diagnostic 3-D fluorescence-enhanced optical tomography is demonstrated using 0.5 to 1 cm(3) single and multiple targets differentiated from their surroundings by indocyanine green (micromolar) in a breast-shaped phantom (10-cm diameter). Fluorescence measurements of referenced ac intensity and phase shift were acquired in response to point illumination measurement geometry using a homodyned intensified charge-coupled device system modulated at 100 MHz. Bayesian reconstructions show artifact-free 3-D images (3857 unknowns) from 3-D boundary surface measurements (126 to 439). In a reflectance geometry appropriate for prognostic imaging of lymph node involvement, fluorescence measurements were likewise acquired from the surface of a semi-infinite phantom (8x8x8 cm(3)) in response to area illumination (12 cm(2)) by excitation light. Tomographic 3-D reconstructions (24,123 unknowns) were recovered from 2-D boundary surface measurements (3194) using the modified truncated Newton's method. These studies represent the first 3-D tomographic images from physiologically relevant geometries for breast imaging.

摘要

使用时间依赖性成像技术,利用外源性近红外可激发荧光剂进行分子靶向,可能实现乳腺癌的诊断成像以及乳腺前哨淋巴结的预后成像。然而,在给予未经证实的造影剂之前,对临床相关体积进行模型研究对于评估荧光增强光学成像在人体中的益处至关重要。在直径为10厘米的乳房形状模型中,使用吲哚菁绿(微摩尔)将0.5至1立方厘米的单个和多个目标与其周围环境区分开来,展示了诊断性三维荧光增强光学断层扫描。使用在100兆赫兹调制的零差增强电荷耦合器件系统,响应于点照明测量几何结构,获取参考交流强度和相移的荧光测量值。贝叶斯重建从三维边界表面测量值(126至439)显示出无伪影的三维图像(3857个未知数)。在适合淋巴结受累预后成像的反射几何结构中,同样响应于激发光的面照明(12平方厘米),从半无限模型(8×8×8立方厘米)表面获取荧光测量值。使用改进的截断牛顿法,从二维边界表面测量值(3194)恢复断层三维重建(24,123个未知数)。这些研究代表了来自与乳腺成像生理相关几何结构的首批三维断层图像。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验