Zhang Ke-Qin, Liu Xiang Y
Department of Physics, National University of Singapore, 2 Science Drive 3, Singapore 117542.
Nature. 2004 Jun 17;429(6993):739-43. doi: 10.1038/nature02630.
The nucleation of crystalline materials is a hotly debated subject in the physical sciences. Despite the emergence of several theories in recent decades, much confusion still surrounds the dynamic processes of nucleation. This has been due in part to the limitations of existing experimental evidence. Charged colloidal suspensions have been used as experimental model systems for the study of crystal nucleation and structural phase transitions, as their crystallization phase diagram is analogous to that of atomic and molecular systems, but they can be visualized using microscopy. Previously, three-dimensional imaging of colloidal nucleation dynamics was achieved using confocal microscopy. However, the limited temporal resolution of the confocal microscope is of concern when trying to capture real-time colloidal crystal nucleation events. Moreover, as the thermodynamic driving force has remained undefined, data on key factors such as the critical nuclei size are at best semiquantitative. Here we present real-time direct imaging and quantitative measurements of the pre- and post-nucleation processes of colloidal spheres, and the kinetics of nucleation driven by an alternating electric field, under well-defined thermodynamic driving forces. Our imaging approach could facilitate the observation of other rarely observed phenomena, such as defect and grain-boundary formation and the effects of foreign particles during crystallization. Furthermore, it may prove useful in identifying optical and biological technologies based on colloids.
晶体材料的成核是物理科学中一个备受争议的课题。尽管近几十年来出现了几种理论,但成核的动态过程仍然存在许多困惑。这在一定程度上归因于现有实验证据的局限性。带电胶体悬浮液已被用作研究晶体成核和结构相变的实验模型系统,因为它们的结晶相图与原子和分子系统的相图类似,但可以通过显微镜观察。此前,利用共聚焦显微镜实现了胶体成核动力学的三维成像。然而,在试图捕捉实时胶体晶体成核事件时,共聚焦显微镜有限的时间分辨率令人担忧。此外,由于热力学驱动力尚未明确,诸如临界核尺寸等关键因素的数据充其量只是半定量的。在此,我们展示了在明确的热力学驱动力下,对胶体球成核前后过程的实时直接成像和定量测量,以及由交变电场驱动的成核动力学。我们的成像方法有助于观察其他罕见的现象,如缺陷和晶界的形成以及结晶过程中外来颗粒的影响。此外,它可能被证明对识别基于胶体的光学和生物技术有用。