Li Qilin, Elimelech Menachem
Department of Civil, Construction, and Environmental Engineering, Oregon State University, Corvallis, Oregon 97331, USA.
Environ Sci Technol. 2004 Sep 1;38(17):4683-93. doi: 10.1021/es0354162.
Fouling and subsequent chemical cleaning of nanofiltration (NF) membranes used in water quality control applications are often inevitable. To unravel the mechanisms of organic fouling and chemical cleaning, it is critical to understand the foulant-membrane, foulant-foulant, and foulant-cleaning agent interactions at the molecular level. In this study, the adhesion forces between the foulant and the membrane surface and between the bulk foulant and the fouling layer were determined by atomic force microscopy (AFM). A carboxylate modified AFM colloid probe was used as a surrogate for humic acid, the major organic foulant in natural waters. The interfacial force data were combined with the NF membrane water flux measurements to elucidate the mechanisms of organic fouling and chemical cleaning. A remarkable correlation was obtained between the measured adhesion forces and the fouling and cleaning behavior of the membrane under various solution chemistries. The AFM measurements further confirmed that divalent calcium ions greatly enhance natural organic matter fouling by complexation and subsequent formation of intermolecular bridges among organic foulant molecules. Efficient chemical cleaning was achieved only when the calcium ion bridging was eliminated as a result of the interaction between the chemical cleaning agent and the fouling layer. The cleaning efficiency was highly dependent on solution pH and the concentration of the chemical cleaning agent.
在水质控制应用中,纳滤(NF)膜的污染及后续化学清洗往往不可避免。为了揭示有机污染和化学清洗的机制,在分子水平上理解污染物与膜、污染物与污染物以及污染物与清洗剂之间的相互作用至关重要。在本研究中,通过原子力显微镜(AFM)测定了污染物与膜表面之间以及本体污染物与污染层之间的粘附力。使用羧酸盐修饰的AFM胶体探针作为天然水中主要有机污染物腐殖酸的替代物。将界面力数据与纳滤膜水通量测量结果相结合,以阐明有机污染和化学清洗的机制。在各种溶液化学条件下,测得的粘附力与膜的污染和清洗行为之间获得了显著的相关性。AFM测量进一步证实,二价钙离子通过络合作用以及随后在有机污染物分子之间形成分子间桥,极大地增强了天然有机物的污染。只有当化学清洗剂与污染层之间的相互作用消除了钙离子桥接时,才能实现高效的化学清洗。清洗效率高度依赖于溶液pH值和化学清洗剂的浓度。