Kahen Kaveh, Jorabchi Kaveh, Gray Callum, Montaser Akbar
Department of Chemistry, The George Washington University, Washington, D.C. 20052, USA.
Anal Chem. 2004 Dec 15;76(24):7194-201. doi: 10.1021/ac048954l.
Two novel laser-based imaging techniques centered on particle image velocimetry and optical patternation are used to map and contrast the size and velocity distributions for indirect and direct pneumatic nebulizations in plasma spectrometry. The flow field of droplets is illuminated by two pulses from a thin laser sheet with a known time difference. The scattering of the laser light from droplets is captured by a charge-coupled device (CCD), providing two instantaneous images of the particles. Pointwise cross-correlation of the corresponding images yields a two-dimensional velocity map of the aerosol velocity field. For droplet size distribution studies, the solution is doped with a fluorescent dye and both laser-induced florescence (LIF) and Mie scattering images are captured simultaneously by two CCDs with the same field of view. The ratio of the LIF/Mie images provides relative droplet size information, which is then scaled by a point calibration method via a phase Doppler particle analyzer. Two major findings are realized for three nebulization systems: (1) a direct injection high-efficiency nebulizer (DIHEN); (2) a large-bore DIHEN; and (3) a PFA microflow nebulizer with a PFA Scott-type spray chamber. First, the central region of the aerosol cone from the direct injection nebulizers and the nebulizer-spray chamber arrangement consists of fast (>13 and >8 m/s, respectively) and fine (<10 and <5 microm, respectively) droplets as compared to slow (<4 m/s) and large (>25 microm) droplets in the fringes. Second, the spray chamber acts as a momentum separator, rather than a droplet size selector, as it removes droplets having larger sizes or velocities. The concepts and results presented in this research may be used to develop smart-tunable nebulizers, for example, by using the measured momentum as a feedback control for adjusting the nebulizer, i.e., its operating conditions, its critical dimensions, or both.
两种基于激光的新型成像技术,以粒子图像测速技术和光学图案化为核心,用于绘制和对比等离子体质谱法中间接和直接气动雾化的尺寸和速度分布。液滴的流场由来自薄激光片的两个具有已知时间差的脉冲照亮。来自液滴的激光散射由电荷耦合器件(CCD)捕获,提供粒子的两个瞬时图像。相应图像的逐点互相关产生气溶胶质速度场的二维速度图。对于液滴尺寸分布研究,溶液中掺杂有荧光染料,并且激光诱导荧光(LIF)和米氏散射图像由具有相同视场的两个CCD同时捕获。LIF/米氏图像的比率提供相对液滴尺寸信息,然后通过相位多普勒粒子分析仪通过点校准方法进行缩放。对于三种雾化系统有两个主要发现:(1)直接注入高效雾化器(DIHEN);(2)大口径DIHEN;(3)带有PFA斯科特型喷雾室的PFA微流雾化器。首先,与边缘处缓慢(<4 m/s)和大(>25微米)的液滴相比,直接注入雾化器和气雾化器 - 喷雾室装置产生的气溶胶锥的中心区域由快速(分别>13和>8 m/s)和细小(分别<10和<5微米)的液滴组成。其次,喷雾室起到动量分离器的作用,而不是液滴尺寸选择器,因为它去除了尺寸或速度较大的液滴。本研究中提出的概念和结果可用于开发智能可调雾化器,例如,通过将测量的动量用作反馈控制来调节雾化器,即其操作条件、关键尺寸或两者。