Suppr超能文献

渗流带中轻非水相液体(LNAPL)渗入与再分布的二维实验室模拟

Two-dimensional laboratory simulation of LNAPL infiltration and redistribution in the vadose zone.

作者信息

Kechavarzi C, Soga K, Illangasekare T H

机构信息

University of Cambridge, Department of Engineering, Trumpington Street, Cambridge CB2 1PZ, UK.

出版信息

J Contam Hydrol. 2005 Feb;76(3-4):211-33. doi: 10.1016/j.jconhyd.2004.09.001.

Abstract

A quantitative two-dimensional laboratory experiment was conducted to investigate the immiscible flow of a light non-aqueous phase liquid (LNAPL) in the vadose zone. An image analysis technique was used to determine the two-dimensional saturation distribution of LNAPL, water and air during LNAPL infiltration and redistribution. Vertical water saturation variations were also continuously monitored with miniature resistivity probes. LNAPL and water pressures were measured using hydrophobic and hydrophilic tensiometers. This study is limited to homogeneous geological conditions, but the unique experimental methods developed will be used to examine more complex systems. The pressure measurements and the quantification of the saturation distribution of all the fluids in the entire flow domain under transient conditions provide quantitative data essential for testing the predictive capability of numerical models. The data are used to examine the adequacy of the constitutive pressure-saturation relations that are used in multiphase flow models. The results indicate that refinement of these commonly used hydraulic relations is needed for accurate model prediction. It is noted in particular that, in three-fluid phase systems, models should account for the existence of a residual NAPL saturation occurring after NAPL drainage. This is of notable importance because residual NAPL can act as a non negligible persistent source of contamination.

摘要

开展了一项定量二维实验室实验,以研究非饱和带中轻质非水相液体(LNAPL)的不混溶流动。采用图像分析技术确定了LNAPL渗入和再分布过程中LNAPL、水和空气的二维饱和度分布。还使用微型电阻率探头连续监测了垂直方向的水饱和度变化。使用疏水和亲水张力计测量了LNAPL和水的压力。本研究仅限于均质地质条件,但所开发的独特实验方法将用于研究更复杂的系统。在瞬态条件下对整个流动区域内所有流体的压力测量和饱和度分布量化,为测试数值模型的预测能力提供了至关重要的定量数据。这些数据用于检验多相流模型中本构压力 - 饱和度关系的适用性。结果表明,为实现准确的模型预测,需要对这些常用的水力关系进行细化。特别需要注意的是,在三相流体系统中,模型应考虑到LNAPL排水后残留的LNAPL饱和度的存在。这一点尤为重要,因为残留的LNAPL可能成为不可忽视的持续污染源。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验