Neff A, Kolk A, Meschke F, Deppe H, Horch H-H
Klinik und Poliklinik für Mund-Kiefer-Gesichtschirurgie der Technischen Universität München, Klinikum rechts der Isar, 81675 München.
Mund Kiefer Gesichtschir. 2005 Mar;9(2):80-8. doi: 10.1007/s10006-005-0600-1.
This prospective study evaluates the outcome after osteosynthesis of condylar head fractures using 1.7 mm small fragment screws (2/2000 ff), which were selected according to a previous biomechanical trial to optimize condylar head traumatology. Clinical and functional results were compared to a group of fractures fixed mainly by mini- and microplates (1993-2000) and to a control group after conservative therapy with early functional training.
Functional values (axiography and MRI) regarding loss of vertical height, disk mobility, protrusive and translatory movements were assessed (a) in 34 of 83 condylar head fractures (groups V and VI according to Spiessl and Schroll, 22/69 subjects) managed by osteosynthesis with 1.7-mm small fragment screws (KFS), (b) a reference group (43/84 subjects) fixed mainly by mini- or microplates (PLO), comprising 56 of 101 fractures (1993-2000), and (c) 16 condylar head fractures after conservative therapy with early functional training (KT) as a control.
In cases of small fragment screws, loss of vertical height (0.3 mm) was significantly reduced (p<0.01) in comparison to PLO (1.6 mm) and KT (6.9 mm). Disk mobility in KFS reached 90% of the non-fractured sides (NFS), thus clearly superior (p<0.01) to PLO (63% of NFS) and KT (40% of NFS). Translatory movements after KFS showed better results, too (p<0.05), with mediotrusion 84% and protrusion 80% of NFS. After PLO, mediotrusion was 62%, protrusion 71% of NFS, whereas KT showed only 53% (mediotrusion) and 56% (protrusion) of NFS. High-grade limitations of translatory movements presented in about 30% after PLO and <10% in KFS (p<0.01). Fragment displacements were found in <5% after small fragment screws, and in the plate osteosynthesis group in 15% (p<0.01).
Due to better stability and reduced articular scarification osteosynthesis with 1.7-mm small fragment screws in condylar head fractures showed clearly superior functional results compared to mini- and microplates, and to conservative therapy.
本前瞻性研究评估使用1.7毫米小碎片螺钉(2/2000 ff)进行髁头骨折接骨术后的结果,这些螺钉是根据先前的生物力学试验选择的,以优化髁头创伤学。将临床和功能结果与一组主要用微型和微型钢板固定的骨折患者(1993 - 2000年)以及接受早期功能训练的保守治疗对照组进行比较。
评估了以下三组患者的功能值(轴位X线片和磁共振成像),包括垂直高度丢失、盘状软骨活动度、前伸和移位运动:(a)83例髁头骨折中的34例(根据斯皮斯尔和施罗尔分类为V组和VI组,22/69名受试者),采用1.7毫米小碎片螺钉(KFS)进行接骨治疗;(b)一个主要用微型或微型钢板固定的参考组(43/84名受试者),包括101例骨折中的56例(1993 - 2000年)(PLO);(c)16例接受早期功能训练的保守治疗髁头骨折患者(KT)作为对照。
在使用小碎片螺钉的病例中,与PLO组(1.6毫米)和KT组(6.9毫米)相比,垂直高度丢失(0.3毫米)显著减少(p<0.01)。KFS组的盘状软骨活动度达到未骨折侧(NFS)的90%,明显优于PLO组(NFS的63%)和KT组(NFS的40%)(p<0.01)。KFS组后的移位运动结果也更好(p<0.05),其中向中侧移位为NFS的84%,前伸为NFS的80%。PLO组后,向中侧移位为NFS的62%,前伸为NFS的71%,而KT组仅为NFS的53%(向中侧移位)和56%(前伸)。PLO组后约30%出现高级别的移位运动受限,KFS组<10%(p<0.01)。小碎片螺钉组中<5%发现骨折块移位,钢板接骨组中为15%(p<0.01)。
由于稳定性更好且关节瘢痕形成减少,与微型和微型钢板以及保守治疗相比,使用1.7毫米小碎片螺钉进行髁头骨折接骨术显示出明显更好的功能结果。