Zmener Osvaldo, Pameijer Cornelis H, Macri Elsa
Department of Adult Dental Care, Faculty of Odontology, University of Buenos Aires.
J Endod. 2005 May;31(5):392-5. doi: 10.1097/01.don.0000145424.99418.ad.
The purpose of this study was to evaluate in vitro the apical seal of root canals prepared with a new rotary system, Anatomic Endodontic Technology (AET) and filled with a methacrylate based endodontic sealer and a single gutta-percha cone and a lateral condensation technique, using the methacrylate based endodontic sealer/filler or Grossman's cement. The root canals of 45 freshly extracted human maxillary anterior teeth were prepared and then randomly assigned to three groups of 15 teeth each. After cleaning and shaping the teeth were obturated as follows: in group 1 the canals were filled with a methacrylate based sealer and a single gutta-percha cone; in group 2 the canals were filled using a lateral condensation technique with gutta-percha and the methacrylate based sealer; and in group 3, the canals were filled by means of lateral condensation of gutta-percha and Grossman's cement (control group). The specimens were stored in 100% relative humidity at 37 degrees C for 72 h, after which the coronal portion and the root surface of each tooth was covered with three layers of nail varnish and a final layer of sticky wax. After immersion in 2% methylene blue dye for 7 days, the specimens were imbedded in clear orthodontic resin and sectioned. Dye penetration was evaluated by an independent investigator using a stereo microscope. The results demonstrated that more pronounced leakage occurred in root canals obturated with the lateral condensation technique and Grossman's cement (p < 0.05). The least amount of dye leakage was observed for group 1 and 2 in which the methacrylate based sealer was used, either with a single gutta-percha cone or with lateral condensation of gutta-percha.
本研究的目的是在体外评估使用新型旋转系统——解剖牙髓技术(AET)预备根管,并用甲基丙烯酸酯类根管封闭剂、单根牙胶尖及侧向加压技术充填,以及使用甲基丙烯酸酯类根管封闭剂/充填剂或格罗斯曼氏粘固剂时根管的根尖封闭情况。对45颗新鲜拔除的人上颌前牙的根管进行预备,然后随机分为三组,每组15颗牙。在清理和成形后,牙齿按以下方式进行充填:第1组根管用甲基丙烯酸酯类封闭剂和单根牙胶尖充填;第2组根管采用牙胶侧向加压技术并用甲基丙烯酸酯类封闭剂充填;第3组根管采用牙胶侧向加压技术并用格罗斯曼氏粘固剂充填(对照组)。将标本在37℃、相对湿度100%的环境中保存72小时,之后每颗牙齿的冠部和牙根表面用三层指甲油和一层粘性蜡覆盖。在2%亚甲蓝染料中浸泡7天后,将标本嵌入透明正畸树脂中并切片。由一名独立研究者使用体视显微镜评估染料渗透情况。结果表明,采用侧向加压技术并用格罗斯曼氏粘固剂充填的根管发生的渗漏更明显(p<0.05)。使用甲基丙烯酸酯类封闭剂的第1组和第2组,无论是单根牙胶尖充填还是牙胶侧向加压充填,观察到的染料渗漏量最少。