Facile formation of water-insoluble cyclodextrin/Nafion composite films on solid surfaces.

The water-insoluble poly-beta-cyclodextrin (poly-CD)/Nafion composite film was easily prepared by casting a mixed solution of poly-CD and Nafion onto substrate plates. FT-IR measurements showed that the 50/50 wt% poly-CD/Nafion composite film remained stable on the glass and quartz substrates after immersion in water for more than 3 h, while a pure poly-CD film was almost completely dissolved by immersion within 1 h. The film stability was also evaluated from the amount of p-nitrophenol (p-NP) inclusion in the film, which was determined from the decrease in UV-vis absorbance of the p-NP solution into which the film was immersed. The composition dependence of the inclusion amount showed that the film was stable up to 50 wt% CD, but became less stable with further increase in the CD concentration in the film. From the isotherms for the inclusion of p-NP and 1-naphthoate (1-Naph) into the film, the inclusion (stability) constants were determined to be 3.7x10(3) M(-1) and 1.9x10(2) M(-1), respectively. These results show that the selective inclusion of CD is retained after preparation of the composite film.