Avendano-Gomez J R, Grossiord J L, Clausse D
Laboratoire Génie des Procédés Industriels, UMR 6067, Université de Technologie de Compiègne, B.P. 529, 60205 Compiègne, France.
J Colloid Interface Sci. 2005 Oct 15;290(2):533-45. doi: 10.1016/j.jcis.2005.04.062.
A multiple emulsion of the type O1/W/O2 is studied experimentally by means of differential scanning calorimetry (DSC). The aim of this work is to characterize and measure the time-dependent changes within the emulsion. In particular, interest is focused to quantify the concentration changes in the internal and external phases of the O1/W/O2 multiple emulsion. In order to accomplish the objective, the measurement and analysis carried out by DSC are based on the crystallization behavior of the emulsion. A volume of a few mm3 is periodically removed from the O1/W/O2 multiple emulsion. The sample is submitted to steady cooling and the crystallization thermogram is recorded. The experimental data provided by the crystallization thermogram makes it possible to quantify the crystallized mass for both phases, the internal and the external. In addition, the composition in each phase can also be deduced from the thermogram. To deduce the composition, a diagram of crystallization temperatures is elaborated, employing several mixtures of known composition. In addition to the main objective previously mentioned, the influence of formulation parameters such as surfactant concentration in the aqueous phase and the mass ratio of the internal and external phases are also analyzed. The experimental results made it possible to conclude that a mass transfer took place from the internal phase toward the external phase; this transfer is caused by the composition difference on both sides of the aqueous membrane. In this work we analyzed the mass transfer in the multiple emulsion carried out by a composition gradient through the aqueous membrane. The most likely mechanism of mass transfer through the aqueous membrane is a solution-diffusion of tetradecane enhanced by the micelles of the surfactant Tween 20. The model of mass transfer confirms that the osmotic pressure difference controls the kinetics of tetradecane transfer. It is also confirmed that an increment of surfactant concentration in the aqueous phase allows a faster kinetics of the tetradecane transfer.
通过差示扫描量热法(DSC)对O1/W/O2型多重乳液进行了实验研究。这项工作的目的是表征和测量乳液中随时间变化的情况。特别地,重点在于量化O1/W/O2多重乳液内相和外相的浓度变化。为了实现这一目标,由DSC进行的测量和分析基于乳液的结晶行为。从O1/W/O2多重乳液中定期取出几立方毫米的体积。将样品进行稳定冷却并记录结晶热谱图。结晶热谱图提供的实验数据使得量化内相和外相两相的结晶质量成为可能。此外,各相的组成也可以从热谱图中推导出来。为了推导组成,利用几种已知组成的混合物绘制了结晶温度图。除了前面提到的主要目标外,还分析了配方参数的影响,如水相中表面活性剂浓度以及内相和外相的质量比。实验结果表明发生了从内相向外相的传质;这种传质是由水膜两侧的组成差异引起的。在这项工作中,我们分析了通过水膜由组成梯度进行的多重乳液中的传质。通过水膜传质最可能的机制是由表面活性剂吐温20的胶束增强的十四烷的溶解扩散。传质模型证实渗透压差异控制着十四烷的传质动力学。还证实水相中表面活性剂浓度的增加会使十四烷的传质动力学更快。