Suppr超能文献

采用含固体共溶剂的超临界溶液快速膨胀法(RESS-SC)制备苯妥英纳米颗粒。

Formation of phenytoin nanoparticles using rapid expansion of supercritical solution with solid cosolvent (RESS-SC) process.

作者信息

Thakur Ranjit, Gupta Ram B

机构信息

Department of Chemical Engineering, Auburn University, AL 36849-5127, USA.

出版信息

Int J Pharm. 2006 Feb 3;308(1-2):190-9. doi: 10.1016/j.ijpharm.2005.11.005. Epub 2005 Dec 13.

Abstract

Nanoparticles are of significant importance in drug delivery. Rapid expansion of supercritical solution (RESS) process can produce pure and high-quality drug particles. However, due to extremely low solubility of polar drugs in supercritical CO(2) (sc CO(2)), RESS has limited commercial applicability. To overcome this major limitation, a modified process rapid expansion of supercritical solution with solid cosolvent (RESS-SC) is proposed which uses a solid cosolvent. Here, the new process is tested for phenytoin drug using menthol solid cosolvent. Phenytoin solubility in pure sc CO(2) is only 3 micromol/mol but when menthol solid cosolvent is used the solubility is enhanced to 1,302 micromol/mol, at 196 bar and 45 degrees C. This 400-fold increase in the solubility can be attributed to the interaction between phenytoin and menthol. Particle agglomeration in expansion zone is another major issue with conventional RESS process. In proposed RESS-SC process solid cosolvent hinders the particle growth resulting in the formation of small nanoparticles. For example, the average particle size of phenytoin in conventional RESS process is 200 nm whereas, with RESS-SC process, the average particle size is 120 nm, at 96 bar and 45 degrees C. Similarly at 196 bar and 45 degrees C, 105 nm average particles were obtained by RESS and 75 nm average particles were obtained in RESS-SC process. The particles obtained were characterized by Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), dynamic light scattering (DLS) and differential scanning calorimetery (DSC) analyses. Phenytoin nanoparticle production rate in RESS-SC is about 400-fold more in comparison to that in RESS process.

摘要

纳米颗粒在药物递送中具有重要意义。超临界溶液快速膨胀(RESS)过程能够产生纯净且高质量的药物颗粒。然而,由于极性药物在超临界CO₂(sc CO₂)中的溶解度极低,RESS的商业适用性有限。为克服这一主要限制,提出了一种使用固体共溶剂的改进工艺——含固体共溶剂的超临界溶液快速膨胀(RESS-SC)。在此,使用薄荷醇固体共溶剂对苯妥英药物进行新工艺测试。在196巴和45℃条件下,苯妥英在纯sc CO₂中的溶解度仅为3微摩尔/摩尔,但使用薄荷醇固体共溶剂时,溶解度提高到了1302微摩尔/摩尔。溶解度增加400倍可归因于苯妥英与薄荷醇之间的相互作用。膨胀区的颗粒团聚是传统RESS过程的另一个主要问题。在提出的RESS-SC过程中,固体共溶剂阻碍颗粒生长,从而形成小的纳米颗粒。例如,在96巴和45℃条件下,传统RESS过程中苯妥英的平均粒径为200纳米,而RESS-SC过程中平均粒径为120纳米。同样在196巴和45℃条件下,RESS过程得到的平均粒径为105纳米,RESS-SC过程得到的平均粒径为75纳米。通过傅里叶变换红外光谱(FTIR)、X射线衍射(XRD)动态光散射(DLS)和差示扫描量热法(DSC)分析对所得颗粒进行表征。与RESS过程相比,RESS-SC中苯妥英纳米颗粒的产率高出约400倍。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验