Dare Kunle, Akin-Ajani Dorothy O, Odeku Oluwatoyin A, Itiola Oludele A, Odusote Omotunde M
Department of Pharmaceutics & Industrial Pharmacy, Faculty of Pharmacy, University of Ibadan, Ibadan, Nigeria.
Drug Dev Ind Pharm. 2006 Mar;32(3):357-65. doi: 10.1080/03639040500519235.
A study has been made of the effects of pigeon pea starch obtained from the plant Cajanus cajan (L) Millisp. (family Fabaceae) and plantain starch obtained from the unripe fruit of Musa paradisiaca L. (family Musaceae) on the compressional, mechanical, and disintegration properties of paracetamol tablets in comparison with official corn starch BP. Analysis of compressional properties was done by using density measurements, and the Heckel and Kawakita equations, whereas the mechanical properties of the tablets were evaluated by using tensile strength (T--a measure of bond strength) and brittle fracture index (BFI--a measure of lamination tendency). The ranking for the mean yield pressure, P(y), for the formulations containing the different starches was generally corn < pigeon pea < plantain starch while the ranking for P(k), an inverse measure of the amount of plasticity, was pigeon pea < plantain < corn starch, which indicated that formulations containing corn starch generally exhibited the fastest onset of plastic deformation, whereas those formulations containing pigeon pea starch exhibited the highest amount of plastic deformation during tableting. The tensile strength of the tablets increased with increase in concentration of the starches while the Brittle Fracture Index decreased. The ranking for T was pigeon pea > plantain > corn starch while the ranking for BFI was corn > plantain > pigeon pea starch. The bonding capacity of the formulations was in general agreement with the tensile strength results. The disintegration time (DT) of the formulation increased with concentration of plantain and corn starches but decreased with concentration of pigeon pea starch. The general ranking of DT values was plantain < pigeon pea < corn starch. Notably, formulations containing pigeon pea starch exhibited the highest bond strength and lowest brittleness, suggesting the usefulness of pigeon pea starch in producing strong tablets with minimal lamination tendency. Plantain starch, on the other hand, would be more useful where faster disintegration of tablet is desired. The results show that the starches could be useful in various formulations depending on the intended use of the tablets with the implication that the experimental starches can be developed for commercial purposes.
一项针对源自木豆(Cajanus cajan (L) Millisp.,豆科)的木豆淀粉以及源自大蕉(Musa paradisiaca L.,芭蕉科)未成熟果实的车前草淀粉,与英国药典规定的玉米淀粉相比,对扑热息痛片的压缩、机械和崩解特性影响的研究。通过密度测量以及赫克尔方程和川北方程进行压缩特性分析,而片剂的机械性能则通过抗张强度(T,一种结合强度的度量)和脆碎度指数(BFI,一种分层倾向的度量)进行评估。不同淀粉配方的平均屈服压力P(y)的排序通常为玉米淀粉 < 木豆淀粉 < 车前草淀粉,而作为可塑性量度的反比的P(k)的排序为木豆淀粉 < 车前草淀粉 < 玉米淀粉,这表明含玉米淀粉的配方通常表现出最快的塑性变形起始,而含木豆淀粉的配方在压片过程中表现出最高的塑性变形量。片剂的抗张强度随淀粉浓度的增加而增加,而脆碎度指数则降低。T的排序为木豆淀粉 > 车前草淀粉 > 玉米淀粉,而BFI的排序为玉米淀粉 > 车前草淀粉 > 木豆淀粉。配方的结合能力总体上与抗张强度结果一致。配方的崩解时间(DT)随车前草淀粉和玉米淀粉浓度的增加而增加,但随木豆淀粉浓度的降低而降低。DT值的总体排序为车前草淀粉 < 木豆淀粉 < 玉米淀粉。值得注意的是,含木豆淀粉的配方表现出最高的结合强度和最低的脆性,这表明木豆淀粉在生产具有最小分层倾向的坚固片剂方面具有实用性。另一方面,在期望片剂更快崩解的情况下,车前草淀粉会更有用。结果表明,根据片剂的预期用途,这些淀粉在各种配方中可能有用,这意味着实验性淀粉可开发用于商业目的。