Barillot I, Reynaud-Bougnoux A
Clinique d'Oncologie et Radiothérapie, Centre Régional Universitaire de Cancérologie Henry S Kaplan, Hôpital Bretonneau, Tours, France.
Cancer Imaging. 2006 Jun 22;6(1):100-6. doi: 10.1102/1470-7330.2006.0016.
Parameters that significantly influence results in radiation treatment of gynaecological malignancies are mainly related to the tumour characteristics and the radiotherapy technique used. High-dose radiotherapy requires accurate localisation of the tumour volume and its relationship to surrounding normal tissues. For many years the standard technique used for irradiation of the pelvic area was the four-field box technique which offered the potential benefit of the lateral fields to shield the rectum and small bowel. However, this conventional technique was designed according to bony landmarks and offered limited information regarding the topography of the tumour and the flexion of the uterus which are influenced by the tumour burden and bladder and rectal filling. CT and MRI enable the visualisation of the cervix, uterus, vagina, iliac vessels and organs at risk, but MRI allows tumour depiction in all planes. In the early 1990s, several studies reported on the value of pelvic MRI in designing the lateral fields of the box technique. They demonstrated that conventional lateral portals would have resulted in a marginal tumour miss and incomplete coverage of the uterine fundus in more than 50% of cases, thus leading to the conclusion that if a box technique is used its design should be based on sagittal MRI. CT-based 3D planning systems are now routinely used in the vast majority of radiotherapy departments. Target volumes and organs at risk are delineated by the physician on each CT slice in order to conform the radiotherapy fields to the tumour volume. For several reasons, such as distortion and lack of electron density which is essential for dose calculation, the implementation of MRI into radiation treatment planning has its limitations. However, MRI can still be used if planning systems integrate tools for CT/MR image registration. There is little experience in the literature for gynaecological malignancies demonstrating that image fusion allows an improvement of the definition of the target and the organ at risk compared to CT alone. Only a few papers in the literature report on the use of CT/MR image registration in planning the external irradiation of gynaecological tumours. Most demonstrate feasibility, but they fail to quantify the improvement for volume definition compared to the use of CT alone. Finally, recent possibilities offered by MRI technology are promising in the area of brachytherapy planning as the full potential of individually defining and evaluating GTV and CTV based on tumour extent and anatomical structures is exploited.
在妇科恶性肿瘤放射治疗中,对结果有显著影响的参数主要与肿瘤特征和所采用的放射治疗技术有关。高剂量放射治疗需要精确确定肿瘤体积及其与周围正常组织的关系。多年来,用于盆腔区域照射的标准技术是四野盒式技术,该技术具有侧野保护直肠和小肠的潜在优势。然而,这种传统技术是根据骨性标志设计的,关于肿瘤的局部解剖结构以及受肿瘤负荷、膀胱和直肠充盈影响的子宫弯曲情况提供的信息有限。CT和MRI能够显示宫颈、子宫、阴道、髂血管和危险器官,但MRI可以在所有平面上描绘肿瘤。在20世纪90年代初,几项研究报告了盆腔MRI在设计盒式技术侧野方面的价值。他们表明,传统的侧野在超过50%的病例中会导致肿瘤边缘遗漏和子宫底部覆盖不完全,从而得出结论:如果使用盒式技术,其设计应基于矢状面MRI。基于CT的三维计划系统现在在绝大多数放射治疗科室中常规使用。医生在每个CT切片上勾画靶区体积和危险器官,以使放射治疗野与肿瘤体积相符。由于多种原因,如畸变和缺乏剂量计算所必需的电子密度,将MRI应用于放射治疗计划存在局限性。然而,如果计划系统集成了CT/MR图像配准工具,MRI仍然可以使用。在妇科恶性肿瘤方面,文献中几乎没有经验表明与单独使用CT相比,图像融合能改善靶区和危险器官的定义。文献中只有少数几篇论文报道了在妇科肿瘤外照射计划中使用CT/MR图像配准。大多数研究证明了其可行性,但与单独使用CT相比,他们未能量化体积定义方面的改善情况。最后,MRI技术最近提供的可能性在近距离放射治疗计划领域很有前景,因为基于肿瘤范围和解剖结构单独定义和评估GTV和CTV的全部潜力得到了开发。