Gillet Jean-Numa, Meunier Michel
Laser Processing Laboratory, Department of Engineering Physics, Ecole Polytechnique de Montréal, C.P. 6079, succ. Centre-ville, Montréal, Québec H3C 3A7, Canada.
J Phys Chem B. 2005 May 12;109(18):8733-7. doi: 10.1021/jp044322r.
Nanocharacterization is essential for nanoengineering of new types of core-shell (c-s) nanoparticles, which can be used to design new devices for photonics, electronics, catalysis, medicine, etc. X-ray photoelectron spectroscopy (XPS) has been widely used to study the elemental composition of the c-s nanoparticles. However, the physical and chemical properties of a c-s nanoparticle dramatically depend on the sizes of its core and shell. We therefore propose a general equation for the XPS intensity of a c-s nanoparticle, which is based on an analytical model. With this equation, XPS can now also be used for nanocharacterization of the core and shell sizes of the c-s nanoparticles (with a diameter smaller than or equal to the XPS probing depth of approximately 10 nm). To validate the new equation with experimental XPS data, we first determine the average shell thickness of a group of c-s nanoparticles by comparing the XPS intensity of reference bare cores to that of the c-s nanoparticles. Then we study the growth kinetics of the cores and shells of another group of c-s nanoparticles where the shells are obtained by oxidation.
纳米表征对于新型核壳(c-s)纳米颗粒的纳米工程至关重要,这些纳米颗粒可用于设计光子学、电子学、催化、医学等领域的新器件。X射线光电子能谱(XPS)已被广泛用于研究c-s纳米颗粒的元素组成。然而,c-s纳米颗粒的物理和化学性质极大地取决于其核和壳的尺寸。因此,我们基于一个分析模型提出了一个关于c-s纳米颗粒XPS强度的通用方程。有了这个方程,XPS现在也可用于c-s纳米颗粒(直径小于或等于约10 nm的XPS探测深度)的核和壳尺寸的纳米表征。为了用实验XPS数据验证这个新方程,我们首先通过比较参考裸核的XPS强度和c-s纳米颗粒的XPS强度来确定一组c-s纳米颗粒的平均壳厚度。然后我们研究另一组通过氧化获得壳的c-s纳米颗粒的核和壳的生长动力学。