Suppr超能文献

小儿肱骨髁上骨折固定技术的生物力学分析

Biomechanical analysis of pinning techniques for pediatric supracondylar humerus fractures.

作者信息

Larson Loren, Firoozbakhsh Keikhosrow, Passarelli Ralph, Bosch Patrick

机构信息

Department of Orthopaedics and Rehabilitation, MSC10 5600, 1 University of New Mexico, Albuquerque, NM 87102-1715, USA.

出版信息

J Pediatr Orthop. 2006 Sep-Oct;26(5):573-8. doi: 10.1097/01.bpo.0000230336.26652.1c.

Abstract

BACKGROUND

Closed reduction and percutaneous pin fixation is the recommended treatment of displaced (Gartland types 2 and 3) supracondylar humerus fractures. The need for a medial pin for maximal stability remains controversial. The purpose of this study was to develop a model of supracondylar humerus fractures simulating medial column comminution and to evaluate the torsional stability of various pin configurations recommended in the current literature.

METHODS

Transverse cuts were made in synthetic humeri with a wedge taken from the medial aspect of the proximal fracture fragment in one half of the specimens to simulate medial column comminution. Each fracture was then reduced and fixed with 1 of 4 pin configurations using 0.062 in K-wires. The fixed specimens were then subjected to a torsional load producing internal rotation of the distal fragment. Rotation in degrees and the corresponding torque was recorded for statistical analysis.

RESULTS

Specimens with the medial wedge removed demonstrated less torsional stability than their identically fixed counterparts with the intact medial column. In specimens with the intact medial column, the greatest torsional stability was achieved with the 2 lateral divergent and medial cross pin configuration followed by 3 lateral pins, then standard crossed pins with 2 lateral divergent pins demonstrating the least torsional stability. For the medial comminution group the 2 lateral, 1 medial pin construct again had the greatest torsional stability and 2 lateral pins the least. The standard crossed pin and 3 lateral pin constructs were not significantly different in the presence of medial comminution.

CONCLUSIONS

In a synthetic humerus model of supracondylar humerus fractures, medial comminution was shown to reduce torsional stability significantly in all pin configurations. There was no statistical difference in torsional stability between 3 lateral pins and standard crossed pins in specimens with medial comminution.

摘要

背景

闭合复位经皮穿针固定是移位型(Gartland 2型和3型)肱骨髁上骨折的推荐治疗方法。为获得最大稳定性而使用内侧针的必要性仍存在争议。本研究的目的是建立一个模拟内侧柱粉碎的肱骨髁上骨折模型,并评估当前文献中推荐的各种针配置的扭转稳定性。

方法

在合成肱骨上进行横向切割,在一半标本的近端骨折块内侧取一个楔形块,以模拟内侧柱粉碎。然后将每个骨折复位,并用4种针配置中的1种使用0.062英寸的克氏针进行固定。然后对固定好的标本施加扭转负荷,使远端骨折块产生内旋。记录旋转度数和相应的扭矩以进行统计分析。

结果

去除内侧楔形块的标本显示出的扭转稳定性低于内侧柱完整的相同固定标本。在内侧柱完整的标本中,2枚外侧发散和内侧交叉针配置获得的扭转稳定性最大,其次是3枚外侧针,然后是标准交叉针,2枚外侧发散针的扭转稳定性最小。对于内侧粉碎组,2枚外侧、1枚内侧针结构的扭转稳定性再次最大,2枚外侧针的扭转稳定性最小。在存在内侧粉碎的情况下,标准交叉针和3枚外侧针结构没有显著差异。

结论

在肱骨髁上骨折的合成肱骨模型中,内侧粉碎在所有针配置中均显著降低扭转稳定性。在内侧粉碎的标本中,3枚外侧针和标准交叉针在扭转稳定性上没有统计学差异。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验