Suppr超能文献

[基于CT的软件支持下肺部分切除术后肺功能预测]

[CT-based software-supported prediction of the postoperative lung function after partial resection of the lung].

作者信息

Beyer F, Heindel W, Hoffknecht P, Kuhnigk J, Dicken V, Lange T, Thomas M, Wormanns D

机构信息

Institut für Klinische Radiologie, Universitätsklinikum Münster.

出版信息

Rofo. 2006 Sep;178(9):872-9. doi: 10.1055/s-2006-926950.

Abstract

PURPOSE

The predicted postoperative forced exspiratory volume in one second (FEV (1)) is an important functional factor for predicting the operability of patients with bronchial carcinoma. A software tool that uses a preoperative chest MSCT and pulmonary function test (PFT) for largely automated prediction of the FEV (1) was evaluated.

MATERIALS AND METHODS

Fifteen patients with surgically treated lung cancer were examined with a preoperative chest MSCT (1.25 mm slice thickness, 0.8 mm reconstruction increment) and PFT before and after surgery. CT scans were analyzed by the prototype software MeVisPulmo (MeVis gGmbH, Bremen) that predicted the postoperative FEV (1) as a percentage of the preoperative values measured by PFT. The automated segmentation and volumetry of lung lobes were performed either without or with minimal user interaction. Patients underwent lobectomy in twelve cases (6 upper lobes, 1 middle lobe, 5 lower lobes) and pneumectomy in three cases. The predicted FEV (1) values were compared to the observed postoperative values as a standard of reference. The additional functional parameters "total lung capacity" (TLC) and "forced vital capacity" (FVC) were compared to the FEV (1) results.

RESULTS

Automated calculation of predicted postoperative lung function was successful in all cases. Due to an implausible PFT, two of the 15 patients were excluded from the collective. A mean postoperative FEV (1) value of 75 % (SD +/- 12 %) of the preoperative FEV (1) was calculated and 74 % (SD +/- 12 %) was actually measured. The deviations of the predicted value from the measured postoperative FEV (1) ranged between - 289 ml (-12 % of the measured postoperative FEV (1)) and + 294 ml (+ 15 % of the postoperative FEV (1)). The mean deviation (absolute value) was 137 +/- 77 ml/s. This corresponds to 7 +/- 3 % of the measured postoperative FEV (1). Bland-Altman-Statistics showed the 95 % "limits of agreement" for the predicted FEV (1) values to be between - 341 ml and + 301 ml, corresponding to - 17.5 % and + 15.8 of the measured postoperative FEV (1) value. Analysis of the TLC and FVC yielded similar results.

CONCLUSION

In the present pilot study the software-assisted prediction of the postoperative FEV (1) using a preoperative MSCT and pulmonary function test corresponded satisfactorily with the observed postoperative values. The introduced approach may make it possible to obtain additional information for the prediction of functional operability prior to performing lung cancer surgery.

摘要

目的

预测的术后一秒用力呼气量(FEV₁)是预测支气管癌患者可手术性的重要功能因素。对一种使用术前胸部MSCT和肺功能测试(PFT)进行FEV₁大体自动化预测的软件工具进行了评估。

材料与方法

对15例接受手术治疗的肺癌患者在手术前后进行术前胸部MSCT(层厚1.25mm,重建增量0.8mm)和PFT检查。CT扫描由原型软件MeVisPulmo(MeVis gGmbH,不来梅)进行分析,该软件预测术后FEV₁占PFT测量的术前值的百分比。肺叶的自动分割和容积测量在无用户交互或用户交互极少的情况下进行。12例患者接受肺叶切除术(6例上叶,1例中叶,5例下叶),3例患者接受全肺切除术。将预测的FEV₁值与作为参考标准的术后观察值进行比较。将额外的功能参数“肺总量”(TLC)和“用力肺活量”(FVC)与FEV₁结果进行比较。

结果

所有病例中术后肺功能的自动计算均成功。由于PFT结果不合理,15例患者中有2例被排除在研究群体之外。计算得出术后FEV₁平均为术前FEV₁的75%(标准差±12%),实际测量值为74%(标准差±12%)。预测值与术后测量的FEV₁的偏差在-289ml(占术后测量FEV₁的-12%)至+294ml(占术后FEV₁的+15%)之间。平均偏差(绝对值)为137±77ml/s。这相当于术后测量的FEV₁的7±3%。Bland-Altman统计显示预测的FEV₁值的95%“一致性界限”在-341ml至+301ml之间,相当于术后测量的FEV₁值的-17.5%至+15.8%。TLC和FVC的分析得出了类似的结果。

结论

在本初步研究中,使用术前MSCT和肺功能测试对术后FEV₁进行软件辅助预测与术后观察值吻合良好。所引入的方法可能使在进行肺癌手术前获得有关功能可手术性预测的额外信息成为可能。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验