Satoh Kaneshige, Mitsukawa Nobuyuki, Tosa Yasuyoshi, Kadomatsu Kohichi
Department of Plastic and Reconstructive Surgery, Showa University, Shinagawaku, Tokyo, Japan.
J Craniofac Surg. 2006 Nov;17(6):1050-8. doi: 10.1097/01.scs.0000235110.92988.fb.
Le Fort III midfacial distraction using internal and external devices is a well-accepted procedure for the midfacial retrusion of craniosynostosis syndrome patients. The authors described 20 consecutive series of Le Fort III midfacial distraction using internal distraction devices. Two types of devices were utilized. One type was a zygoma-skull device (the anterior part of the device is attached to the zygoma, and the posterior part is attached to the skull), which was used in six cases. The other was a zygoma-zygoma device (the anterior and posterior parts of the device are attached to the osteotomized zygoma, respectively), which was used in 14 cases. Subject ages ranged 3-32 years. A 14-20-mm distraction length was obtained by 1 mm/day. Satisfactory distraction of the midface was obtained in 17/20 cases. In 3/6 cases in which a zygoma-skull device was used, an unsatisfactory result was obtained. In these three cases, a fracture of the zygomatico-maxillary suture was encountered, resulting in the Le Fort III portion being left behind. In all 14 cases in which a zygoma-zygoma device was used, a satisfactory result was obtained. During the distraction period, the connection of the distraction device was dislodged, resulting in re-connection in three cases. Slight asymmetry was noticed in two cases without any need for management. In order to obtain parallel setting of the bilateral distraction devices, a newly developed parallel bar was used and demonstrated to be effective.
使用内部和外部装置进行勒福Ⅲ型面中部牵张成骨术是治疗颅缝早闭综合征患者面中部后缩的一种广泛接受的手术方法。作者描述了连续20例使用内部牵张装置进行勒福Ⅲ型面中部牵张成骨术的病例。使用了两种类型的装置。一种是颧骨-颅骨装置(装置的前部附着于颧骨,后部附着于颅骨),用于6例。另一种是颧骨-颧骨装置(装置的前部和后部分别附着于截骨后的颧骨),用于14例。患者年龄范围为3至32岁。以每天1毫米的速度获得了14至20毫米的牵张长度。20例中有17例面中部牵张效果满意。在使用颧骨-颅骨装置的6例中有3例效果不满意。在这3例中,颧上颌缝发生骨折,导致勒福Ⅲ型部分遗留。在使用颧骨-颧骨装置的所有14例中,均获得了满意的效果。在牵张期间,牵张装置的连接有3例发生移位,需要重新连接。有2例出现轻微不对称,无需处理。为了使双侧牵张装置平行设置,使用了一种新开发的平行杆,证明是有效的。