Suppr超能文献

白内障超声乳化术透明角膜颞侧及轴向上切口的扭矩和平坦化效应

Torque and flattening effects of clear corneal temporal and on-axis incisions for phacoemulsification.

作者信息

Borasio Edmondo, Mehta Jodhbir S, Maurino Vincenzo

机构信息

Moorfields Eye Hospital, London, United Kingdom.

出版信息

J Cataract Refract Surg. 2006 Dec;32(12):2030-8. doi: 10.1016/j.jcrs.2006.09.010.

Abstract

PURPOSE

To compare the torque and flattening effect induced by temporal or on-axis clear corneal incisions (CCIs) for phacoemulsification.

SETTING

Moorfields Eye Hospital, London, United Kingdom.

METHODS

Randomized controlled clinical trial on 62 eyes with cataract and mild to moderate corneal astigmatism (<2.60 diopters [D]) having phacoemulsification with a temporal CCI (temporal group) or on-axis CCI (on-axis group). Corneal astigmatism was assessed by corneal topography preoperatively and 3 weeks after surgery. The meridian of the incisions was marked on the cornea before local anesthesia was given to avoid anesthesia-related cyclotorsion. The surgically induced astigmatism (SIA) vector, torque, flattening effect, and accuracy of incision placement were analyzed in the 2 groups and compared with a paired t test.

RESULTS

Three weeks after surgery, the on-axis CCI induced slightly more flattening of the meridian of the incision (mean -0.63 +/- 0.57 D [SD]) than the temporal CCI (mean -0.50 +/- 0.44 D); however, the differences were not statistically significant (P = .31). Simple algebraic difference showed a mean increase in astigmatism magnitude of 0.12 +/- 0.52 D in the temporal group and a mean reduction of 0.21 +/- 0.53 D in the on-axis group (P = .02). The mean absolute torque was 0.28 +/- 0.27 D and 0.53 +/- 0.37 D, respectively (P<.005). The absolute angle of error of incision placement (alpha) was greater after on-axis CCIs (mean 25.9 +/- 20.1 degrees) than after temporal CCIs (mean 14.5 +/- 14.3 degrees) (P = .01).

CONCLUSIONS

In eyes with preoperative astigmatism less than 2.60 D, on-axis CCI phacoemulsification induced slightly more flattening along the incision meridian than temporal CCI phacoemulsification, although the differences were not significant. The on-axis CCI was associated with significantly greater absolute torque and angle of error than the temporal CCI. These factors could limit the benefit of placing the incision on axis when the aim is to reduce preoperative astigmatism in phacoemulsification.

摘要

目的

比较颞侧或轴向上的透明角膜切口(CCI)在白内障超声乳化术中所产生的扭矩和扁平化效果。

设置

英国伦敦穆尔菲尔兹眼科医院。

方法

对62例患有白内障且伴有轻度至中度角膜散光(<2.60屈光度[D])的患者进行随机对照临床试验,这些患者接受了颞侧CCI(颞侧组)或轴向上CCI(轴向组)的超声乳化手术。术前及术后3周通过角膜地形图评估角膜散光情况。在局部麻醉前在角膜上标记切口子午线,以避免与麻醉相关的眼球旋转。分析两组手术引起的散光(SIA)向量、扭矩、扁平化效果及切口放置的准确性,并采用配对t检验进行比较。

结果

术后3周,轴向上的CCI使切口子午线的扁平化程度(平均-0.63±0.57 D[标准差])略高于颞侧CCI(平均-0.50±0.44 D);然而,差异无统计学意义(P = 0.31)。简单代数差显示,颞侧组散光度数平均增加0.12±0.52 D,轴向上组平均减少0.21±0.53 D(P = 0.02)。平均绝对扭矩分别为0.28±0.27 D和0.53±0.37 D(P<0.005)。轴向上CCI后切口放置的绝对误差角(α)(平均25.9±20.1度)大于颞侧CCI后(平均14.5±14.3度)(P = 0.01)。

结论

在术前散光小于2.60 D的眼中,轴向上CCI超声乳化术沿切口子午线产生的扁平化程度略高于颞侧CCI超声乳化术,尽管差异不显著。轴向上CCI与显著更大的绝对扭矩和误差角相关,而颞侧CCI则不然。当旨在减少超声乳化术中的术前散光时,这些因素可能会限制将切口置于轴向上的益处。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验